Clip downs currently being printed. Lot beefier than the factory ones.

Those are the clips printed in ASA which is ABSs big brother.

Today I have mostly been 3d printing replacement parts for the 322. Namely replacement studs for the scuttle panel and clip down points for the boot floor. Also 3d printed a instrument cluster mount to use a lcd panel and raspberry pi as the...

Just a quick follow up. Finally got the tank level down to 1/4 tank (yes, it's not used much) and it's still running properly so looks like there was an issue with the fuel pump not siphoning fuel from one side of the tank. Time to start fixing...

I best not look then. I hate having switch blanks and unused connectors. Does my OCD in as something can be there but isn't......

Curious, the electrical library pdf I had only listed 2 15 way connections on the car. Might have to check mine now 🤔

Not sure it'll be just for memory seats as such, more likely linking the memory seats, mirrors and steering column maybe so they can automatically adjust for each user/key/button preset. Again, still learning how everything works, just basing...

Maybe Lunatic Confirmation Module

I have no idea tbh, pure guess. Only had the car 7 weeks and not even taken that trim off yet.....

Wondering if it could be this if its not meant for the LCM on the A-pillar.

Pot holes or bomb holes?

There's my baby. Slightly modified to say the least 😂

Know the feeling, there's some roads round here I'll only go down in the niva.

The old saying is true: In the UK we used to drive on the left of the road, now we drive on whats left of the road.

I'll agree with the Meyle HD parts. The 9-5 i have used to go through droplinks every 6-12 months. Meyle HD now been on for about 10 years and only just needing replacement. The roads round Oxford are generally crap at best as well.

Had a cup of coffee and a chocolate brownie whilst I prepped the new side steps to go on the rangey. Then pressure tested the AC system, found a hole in the condenser, drank more coffee and ate the other 11 brownies in a fit of depression, then...

That ranks up there with "it'll only take 5 minutes"

If you want something to discuss, search haribo gummy bear reviews.

Here we go with the tea and cake again 😂😂

Likely imperial then?

In true Land Rover style, I fixed one coolant leak only to find another, on a stupid preformed BMW plastic pipe. The old plastic pipe i think I was very lucky with. Undid the 3 bolts holding it to the block and the branch off it just fell off...

Connector size is generally suited to the hose size. A hose with 5/16" (8mm) internal diameter is best suited to an AN6 fitting. Which had a 9/16 thread diameter. A 3/8" hose (10mm) will be suited to AN8 which is a 1/2" thread. 1/2" hose about...

Not got one myself so can't say exactly but may be able to help a bit. Does the pump have AN fittings on it now?

That poor train keeps going through the buffers :vb-biggrin:

🤭

I bet the driver was getting some cake

Why does my auto carrot keep replacing right words with wrong ones?

In your dreams :)