• O
    Offie replied to the thread P38A Select neutral message, stuck in Low..
    Is the gearbox ECU under the drivers seat ? (RHD vehicle).
    Apr 5, 2025
  • O
    Offie replied to the thread P38A Select neutral message, stuck in Low..
    I agree , At least I now have the car running and I will next check out the ECU and H/L switch as you suggest.........at least these are cheap parts!! Incidently the car has only done 50,000miles from new (1995, P38 4.6) so I know there is no...
    Apr 5, 2025
  • O
    Offie replied to the thread P38 4.0 v8 Automatic goes into low range all on its own.
    Glad you fixed it as I have similar issues with mine being stuck in Low when on High side and select neutral message. I ended up putting the transfer box manually into high and with the motor back in place I took out the transfer box fuse so...
    Apr 4, 2025
  • O
    Offie reacted to Datatek's post in the thread P38 4.0 v8 Automatic goes into low range all on its own with Like Like.
    Or it could have been a corroded connector. My practice is always to put the supposedly defective part back to see if the fault reappears. Good news that you have fixed it.
    Apr 4, 2025
  • O
    Offie posted the thread P38A Select neutral message, stuck in Low. in Range Rover.
    This happened after I replaced the front drive shafts (after taking hub off) and could it be due to tightening up the drive shaft nuts with gearbox in "Park". I think I have caused something to mis aligne in the transfer box. Maybe the round disc...
    Apr 4, 2025
Show older items