Hey, Thanks for all the help - I'm delighted to say that I'm back up and running :D So I tried the new solenoid a few different ways but actually leaving that spare upper spade connector free seems to have done the trick and just connected the wires I had on the previous solenoid. She turns...

You are absolutely correct Mega, I've attached a photo of the old wired solenoid. Browns from those male spades. Okay so I think the old solenoid took the earth from being bolted on but for this one I will need to make a new earth and connect to that upper male spade? That raises another...

Hello again, Sorry for the silence, since I made this post I have been waiting on the cables arriving - which they did today!! Woo! But looking at the new solenoid I have put the two old male spade connectors from the original onto the battery side but it looks like I have an extra male spade...

Great advice, I will do exactly that :) Thanks again for all the help!

Thanks Mega and Lynall! So I removed the wiring for the trailer plug, reconnected the wires, fitted new LED bulbs and it worked :D I am proper chuffed - thanks for all your help! :)

Thanks Mega, No that was just me that twisted them to test after cutting away the corroded trailer wire. Would I need to connect the earth up to four wires you see there? They do go into the back of the rear lights and they are earthed there.

Thanks for the advice! Maybe it is the earth, I don't know it you can see in the photo there was an earth which I think was for the trailer, but maybe I somehow need to reconnect it

Thanks for the advice, I went and got a multimeter and followed the wire, do you know where it goes after it goes behind the dash? Thanks again!

Hi there, My brake lights stop working the other day and I went under to see what the issue was. There was a number of corroded wires underneath (at rear right of car). A previous owner had installed a plug for a trailer but these had all corroded so I cut them back and reconnected (albeit just...

Thanks again Rynner - I will give it a look online :)

Hey Rob, thanks for the reply - I think I might end up going down the same road if I'm honest! Thanks again, Scott

Brilliant thank you again Europa and also @Colthebrummie for you advice. Cleaning everything up and replacing the heavy cables! Thanks again, Scott

Thanks for the reply ExMil109! I think the deeper I dive into the landy the more electrics I'm going to replace. I've ordered a new cable: https://www.autosparks.co.uk/bc301-land-rover-series-3-battery-to-solenoid-lead.html And I've also ordered a new Solenoid to Starter cable from the same...

Thanks for the reply Mystery, I will get brass washers and nuts but I've already ordered this cable: https://www.autosparks.co.uk/bc301-land-rover-series-3-battery-to-solenoid-lead.html So I'm hoping that should be okay?

Thank you Rynner, I definitely don't want that! I have already bought a fire extinguisher for the car but before reading your comment I already purchased this cable: https://www.autosparks.co.uk/bc301-land-rover-series-3-battery-to-solenoid-lead.html Do you think it will suffice? Thanks, Scott