Thanks I think I will take the box out it will be better for me will replace with duel mass one

I have to replace the clutch on my td4 2002 fl1 is it easier to take the gear box out or take the engine and box out . I'm I best to replace the duel mass fly wheel with a solid one thanks

Thanks for the advise I will start the gearbox remove to see what parts I need

Tyres are all good and correct pressure clutch pedal is very light if the ird is faulty how will I know

Hope so I can do the clutch

Hi my fl1 broke down to day I was changing gear when there was a load bang then there was no drive I can put it in gear and feel a vibrating through the gear stick clutch feels very light any one help thanks even when in gear there is no drive

Thanks for the info it's a number 8 Cheers

Hi I need a new security nut for my alloy wheels 2003 2.5 v6 sport any one tell me which one I need there is one on eBay that says code A 1996 2006 will this do or are there different codes Cheers NEIL

Hi I had the same fault on my 53 reg v6 yours will have the active abs system . Mine had been fitted with the wrong drive shaft I changed the drive shaft and the sensor drove down the road a bit and the lights came back on . I had to change the wheel bearing as the abs sensor had been forced...

If it's the same as mine the black bolt in sensor with a blue plug £36 + vat form DAVIDSON AND McMillan inverness he does mail order phone number 01463 241914

I got the icarsoft for land rover works great tills you what is wrong but not what is causing it

Can't leave the plug lights still stay on . I think it has a wrong drive shaft on the driver's side as the abs sensor is wearing on one side not the bearing side

Thanks for the info . I have checked the ohms it's a new sensor testing below 1ohm not checked for volts will try that . I have the icarsoft diagnostic tool for landrover this says right front wheel sensor signal periodic . Will check the wiring and pull the plug of the abs ecu see if there is...

Tried to fix the 3 amigos fitted New wheel bearing and abs sensor . Still got the 3 amigos

2003 53 reg 2.5 v6 es auto . Yes it is the correct bearing and sensor for my car there is only one sensor that will fit black plastic sensor with a blue plug . wheel bearing is the one for this modal the sensor gets it signal from the bearing there is a sticker on the bearing so you know which...