The bush where the roll bar fastens to the sub frame seems tight and when I waggled the bar by hand (with the drop link disconnected on one side) i couldn't make the noise.
The tie rod and control arm have both been replaced so the bushes should...
Torque converter lockup clutch problems, very common.
F clutch failure
Broken clutch drums
regulator issues within the valvebody.
all are major issues and quite common.
pulling away in first is very relevant even when not towing your 1st gear will fall roughly were my 2nd gear is according to your figers and starting in second gear is what destroys the centre bearing on my prop, oh and ive not changed any mountings
people were telling you what may go wrong but you dismiss it as not relevant then quote figers which untill its done are but theoretical, i havent even mentioned the centre prop bearing, which i can tell you disintigrates with a manual box due to...