Not copper grease my mate and only if its silicon grease not sealer! 🤔.
If you don't have any other grease, wet the oring outer surface which will allow them to slide in while fitted on the pipe end.
Yesterday, I had chat with a collegue of mine about harnesses and how to replace them. She said, easy, if you have the old one, strip everything, see where it is routed, connect as specified. Take pictures and mark connections.
Easy for her to...
I simply swapped the radio for a modern unit, gaining the microphone for calls as well and then traded the old unit for some bits.
There is a mod on the YouTube that is a little more involved than I wanted to be. 👍
Actually as I have said, I have seen other people ask questions here, get abused and then just disappear from this forum.
So things have not been ok for a year.
The only difference is that I didn't disappear, I have stayed to point out what is...
Why would I go elsewhere when you clowns are still coming here making your ridiculously stupid comments?
I have been reading this forum for a while, because I do not know everything.
I mean think about that for a minute, if I knew everything...
Except these are for sale because they exist, and they are for the 8 speed so logically they have a lower ratio.
I do not need to see an official piece of documentation to know that something exists when it has been mentioned all across the...
If you look at the attached image it shows the specific vehicle that it comes from.
This took me one minute to find using a simple Google search.
Maybe the issue is not me, it is your understanding of how to use Google?
That would be the most stupid thing to do because people ask questions and interact to come to a final conclusion, as they have done elsewhere with me on this topic.
And besides, once the idiots here came with their condescending patronizing...
I think maybe it would have been a better idea to ask the same question on every single Landy forum you could find then gone away for a week before looking on those forums to see if anyone else had done it. Rather than wasting your time having...
I did! They're on there somewhere, 11 quid from the main dealer
I tried this with a fridge magnet, but I think it was too weak, the magnetisation was pathetic. Think I'll make a trip to Screwfix
So I feel all hurt now as I feel I was abused by comments from you.
I believe your comments to me have been pretty patronising to be honest.
This is a technical issue and you haven’t even had the decency to answer me technically in anyway, you...
Yes and that’s fine as I said I have seen them. And the vehicle they say they come from.
But I have yet to see any official documentation that contradicts mine. With your initial google suggesting it may be an option in the rear, so yes wording...
Actually I have seen many people leave this forum after being insulted and abused by the arrogant regulars
The only difference is that I stuck around and didn't bend over.
So in fact this is quite a good representation of this particular forum...
That was only in response to you saying that I would never find the answer here implying that if you didn't have the answer then nobody would have the answer.
But when I came here I knew that it was possible that somebody might immediately have...