Full tank and not much of a slope at all . I did have a leaking fuel pipe from the inline filter that runs near the battery box but I simply replaced the pipe but I had this problem before that . Could the plastic inline fuel filter give any...

Is that actually a self portrait?

Don't worry kiddo, them from above will do it for you😊

I have asked the Mods for you.

We know that mate. 🤗

I think (bar a few well known exceptions) everyone's advice on here is extremely valuable and well received

It can be done by the moderators. 👍

Mods please move this to the Freelander section, thanks.

How steep is the hill your parked on? Half tank, quater tank or full tank of fuel? Any diesel smells from under the bonnet? 🤔

2003 Freelander 1 TD 4 . After an engine change a year ago my car is sometimes difficult to start when it's been parked pointing up hill . I really don't know if the up hill parking is part of the problem but if parked flat or pointing down hill...

You may get a better response in the Freelander section.

Too much trouble to answer a question but plenty of time for vitriol, not related to Trump are you?

From the photo, the screw doesn't look long enough? With the screw entered into the thread , the pipes can be wriggled in to place. A smear of silicone grease holds the O rings in place.

OMG I could find a 15-year-old that understands that if Google says something then you can just follow links to more in-depth articles to get the full information. The image that I showed you first told you that the 2.76 diff came from the 4.4...

What's the secret to getting this clamp and screw back on the heater matrix? I've been at it for hours, it's kicking my arse Is there a certain way the clamp is supposed to sit on the matrix?

One of the pipes looks out of line kiddo, once they're both placed the aluminum bracket on the rear can be brought towards the collar with the screw through it and nipped up. My advice, (although not worth shït apparently) walk away have a few...

Actually, having given this some more thought, I’m talking rubbish. You can see that the lip seal is installed into the shift motor the ‘wrong way round’ i.e. the front of the seal first, because it’s there to prevent the transfer box fluid...

So you cropped the first image, and now you post a second, which makes a bit more sense but is not part of what you originally posted. Info about the Russians being good guys is online too :rolleyes:. I could probably find the Earth is flat too...

I gave you a real technical concern question. You yet again Pooh poohed it. Yet you expect me to believe your google search and “they work great in the rear” which you seem to validate because you posted it. Yet apparently you have an huge...

I might have to ask a 12 year-old girl to explain to me the meaning of your meme pictures that you like to post here. The fact that none of you understand how rude and condescending you are and how unhelpful you are is what makes this situation...

I appreciate real feedback, I just don't appreciate patronizing insults. That's the thing that you have never understood and never will. If people had said something like "I do not know if the diffs will fit, but you might find the acceleration...

Are, that I didn't know🤔👍

Trailer electrics are both sides on the P38, 7N on the right, 7S on the left side.

I think that many users never select low range during their entire period of ownership, so the lip seal, which is designed as a rotating seal, ends up as a static seal. (The same reasoning also applies to the rotary potentiometer in the shift...

Stop making this poor git repeat himself, Again, Again, Again, Again... Come guys, it's old news and nothing has come of this other than a little boy with his ball who wants to shout and does not appreciate real feedback from people with or...