Do a search, I think certain MGF lock assemblies are the same as the P38 but much cheaper. I would certainly take the lock assembly out, dismantle it and check what is wrong. It may be repairable
Tbh it is no bad thing. Letting the torque spin out protects the driveline to an extent
The issue with the m57 is that it makes a lot of torque very low down
I have put a pneumatic centre diff lock in but I doubt I will ever use it unless I get...
Take the spark plugs out (distributor cap seems to be missing ??). Then crank it on the starter motor & check the oil pressure and get the oil circulated where required.
Then I would put sparkies in & get it to fire up & idel before revving it up.
Now fair enough you might set the car on fire with a plumber torch soldering tiny wires but you can get electric soldering irons now which would be a little safer or even small gas powered ones lol.
Had same on my
Had same on my P38 SRS light kept coming on because of the connection so in the end I cut it out and soldered the wires together, end of problem.
Ooh, the next thing is listen to the engine running with what resembles a doctors stethoscope.
The noise could then be almost pin pointed to an area and give you an idea of where to go next.
I had a client bring a jag with the 2.7td v6 to the...
I got bored and fed up. Reset gearbox adaptions. All the clunks and hard shifts have gone. It's like a new car!
Obviously when i paid the garage to do it and asked "have you done it" the dude obviously lied because it was no better.
If you want...
I arrived back in the UK today so will start to get the RR sorted and up for sale or at least one of them.
Flew from Brisbane to Bankock with Singapore Airlines and then flew up to Chang Ria the next day with Air Asia and spent a couple of day...
Direnza just buy them from the supplier that supply ebay sellers. I know this personally through my own experience.
They just add their name plates to them😒
AI said…
Converting a Range Rover Sport with 285/35 R22 tires to steel rims and all-terrain (AT) tires involves a few key considerations. Steel rims are generally heavier and offer a different aesthetic compared to alloy wheels. Additionally...
You won’t find AT tyres in that size, so you need a reseller that can recommend steel rims that use the same bolt pattern and offset, and then get ATs to fit that steel rim (as I’m sure you know). I find Maxxis Razr ATs are excellent on wet and...
A good question, it's an x5 transmission setup?? 🤔
My advice to the poster is to find someone who knows these cars who will help you better and more economically without just throwing time and money at it leaving you disappointed in the vehicle...
À good question, what are you intending to do with the tank?
Not being a l320 owner after seeing g what these cars will do with even normal Tyres and if you have a mooch on the YouTube a lot of these cars are running mild a/t tyres. One big...
Head overtemp alarm went off on the way home but needle bang on 12 o'clock. Reversed into the drive to clouds of white steam - sh1t! Radiator cracked along the top and ****ing coolant. That's a Nissens one that has been on maybe 10 years.