NO they are the later type where the bleed pipe stays at much the same level I think. Definitely not under the battery tray. I'll double check tomorrow.
Have the glow plugs checked as well. Even one not functioning will stop a regen👍
The pressure sensor value should be around 2 bar at idle, 4 tops.
If it's more and also a really high figure at 2500rpm then it'll confirm a partially blocked or...
You can open and close the windows using the Nanocom which proves the systems after the switch pack work, I.e becm and out stations in the doors.
You've already proved that certain window motors work.
Hopefully just dirty switch pack contacts. It...
Looking at the amount of snow, it's unlikely to be the UK.
And I'm jealous of all that snow, I love snow......
Perfect weather for the Niva. (Sorry for swearing)
Hey Keith, does your two have the down and under bleed pipe that goes beneath the battery tray?
I replaced the down and under type for a rubber tube that goes around the battery and directly to the coolant tank. Far less bother bleeding after that😎👍
The nissens I had did indeed have a baffle, doesn’t necessarily mean yours does, missed in manufacturing, sent wrong one there’s many reasons. Usually we do Wammers test - turn it upside down and try to roll a marble through the top before...
Do you mean the Nissens radiator? If the top is hot and the bottom is cold, the baffle is either missing or it has failed. Or just possibly there is an airlock that is stopping circulation.
It's an 06 L322.
I still have a roof over my head and both kidneys so somehow doubt it was genuine. Still the wrong side of 500 fitted though.
Did test the rain sensor was fitted right by squirting a bit of water onto the sensor position and...
Yes, I feel the OP has acted very irresponsibly in hyjacking a technical forum with his trash thread.
He should hang his head in shame.
However, I hope our mighty leader does not shift this thread to AG, as it will descend into AG level of...
Hi learned forum members. I wonder if you could help me with some advice. Sorry if this has been asked before but I've recently been reading this forum thread that says "please ignore". Now the problem is I've not ignored it and have only gone...
Just checking everyone is being, as usual, an upstanding and responsible adult within the community and ignoring this thread.
@MGT See what you have done? There is real work not being done in the world right now because of you.
A simple...