You really need to get a copy of RAVE, it's all in there. Do the rear windows work from the rear switches? Fuses F1 2: 9; 12 & 22 are involved. Not sure where they are located but I think ubder the seat.

Is something still holding it? With me driving a nammer hub would like like an 8ft sheet tin foil after a day 🤔 You got a bigger nammer?

For £18 I’ll take the punt and order one then. I removed it a little while ago and couldn’t smell anything burnt however that’s not to say it’s happened and then the smell has faded.

No coding needed. I am unsure but I think all the Auto ones are the same. Does yours smell of burning? The drive transistors burn out if the motor jams.

I've been at it all day

Heat, welt the f!!!!!r, heat again. Patience and persistence 👍

Getting the 'front' control arm swivel off is a bit off a how to do

As is getting the axle out of the hub :(

A really corroded diagnostic socket and wiring has been known to throw up errors in the entire ABS/TC arena. We have had this before and obscure though it was it turned out that the bringing together of all these outputs at the diag socket...

And the verdict is in. . . . . . . T'was a wire fault. All now fixed 😁👍

And these for the HiD’s https://www.aliexpress.com/item/1005004226378724.html

Have decided to upgrade various lighting elements, so a quick trip to Ming Woo's Parts Emporium and I've got: New Puddle Lights (These have never worked so will take forever to get working) New Reverse lights so I can see what I'm going to hit...

Well done that man and thank you for listening 👌🤩👍

It is and thank you. Build #280. Had it 9.5 years now, still good fun too.

Is it a Boss, very nice indeed.

You'll end up with a white border around the frits (that is the official name for the little dots that join the black and clear glass BTW) and it'll look garbage like all aftermarket tints (in my humble but unswerving opinion of course). Factory...

Best advice ever Mark, thank you. 3 hrs of googling and nothing conclusive. Some videos say you have to remove the rear seats and some say not but don’t show how. As you suggested I went out there and carefully peered behind carpets and...

Jeez, really?? Just to change shocks🤯

Any use🤔

Not personally, you may need to get in there and find out kiddo. You can at least confirm for the next person 👍

It was in reverse with handbrake on. Straining like a good un to move. Frightened the life out myself when I finally realised what I'd done. 🤦‍♀️

Transit passed it's MOT, cheeky bugger said it's so shiny it's as good as new. Just an advisory on the front tyres as they are getting near the limit.

I thought it was in park my dear. Then couldn't work out why it was creaking and groaning 🙈

Mark was first!

Your welcome 😜

Dead sphere 👍

I had a Parker set😁

So did i🤣

Good evening, First post so take it easy lol I recently purchased a l322 td6 2004, within a month I had the well documented LCM issues. Sent my LCM to be refurbished and problem solved......or so I thought a couple of months later the problems...

Hi Keith yep, the green circled ones are for the prop as you say, mine was the same but I repaired it and bought a new part, I am a tad OCD with parts that are not there........ ;) Edit: BTR2942 - STOP-SPARE WHEEL STRUT