That's exactly what I was thinking about. I will do the change again after 1-2k KM.
I'm afraid that the last oil change was in 2022 - with extremely few killometres.
Thank you! I have now had another look. Exactly at minimum. I'm topping up a little. But the car is currently standing a little uphill - I'll keep an eye on it.
Do I have to worry that the old oil was a little thick (deposits at the bottom of...
Are you standing on an almost perfectly level surface, ive noticed my oil level change quite drastically based on the levelness of the surface.
I check my level about 5min after engine turnoff thats plenty time for all the oil to drain back down...
Always worth having a refurb kit just in case. That way if it fails one day, you can refurn in the evening, and have the car going ready for the next day !!
As Keith says, excessive vibration is usually one or two of the rubber mounts failed.
In a bid to reduce my road tax and congestion charging bills, I've cleverly disguised the car as part of the Japanese Imperial Navy. Does anyone know how you get the diplomatic plates? eBay? Doesn't need to have the D dropped, I'm not that...
Took her for a nice day out and left her sat in the sun overlooking the hills around Burnley while I went to a garden party and she must have overheard me when someone said what's broke this week and I said nothing she's all good cos she rewarded...
Series ain't ready yet.. need to bleed the brakes and replace the clutch Flexi. Then it should move.. I've got new brake shoes to put on.. the tyres are.. ermm... old!!!
I find the older you get the longer it takes I did the rear bearing on my disco 3 and when i came to put it back togeather there was a return spring missing on the R /H side handbrake shoes i spent 3 days looking for it and then finally ordered...
Put the wheels back on the series lol, what about the bike?
OMG 🫣
Nothing wrong with your memory, my brain must have blanked that for good measure 😂 (plausible deniability)
Update
I went to drop the tank but I decided to lift the back seat.
I found a cut in the floor.
Someone had went at it..
So I continued to remove sender..
The 2 nuts were a nitemare to remove, they were in bad shape..
I got them wit a lot of...
Update. Well that was easy, just place a carpet over the modules under the seat (removing seat first) then lay on your back on the carpet, legs in the air, arms under the dash. Got it out and done what I wanted to.
Now on to the next disaster.
40K+ posts in. No chance of derailing this thread. I dare you to read from the beginning. Cake, biscuits, our discussion on midget gems will leave you speechless possibly even banned 😂