Hello all, I'm selling my mk1 freelander, I've unfortuanly decided to change to a diesel mondeo for longer journey economy and I've been thinking about selling my freelander for a while but I think it's time to let it go. I've got it listed on ebay for those who'd like to view it via their...

It might be a fault with the radio unit itself. Do you have access to another one to test that?

Please tell me no one has actually done that?!

Nice good solution of it works for you!

Only ever heard of the one in the video you posted. I think because so many people recondition or remove the tegraloc never really took off.

I've voted on poll and liked! Very generous!

Thanks @Nodge68. 1. I've added some slack to the cable, I'll measure later to be sure but I'd say there is roughly 10mm movement in the pedal before the throttle starts engaging. 2. My OBD2 diagnostics read the throttle position was 3.9% at rest, I'm not sure if this is correct. 3. I'm not...

Won't be anything wrong with mine then because the lights and wiper comes on each time I pop reverse on. Thanks for the info. Can the 1st and reverse switch be tempermental? I think before I swap out any sensors I'll first try cleaning inside the throttle body where the valve open and closes.

My attempt at reading it was useless! I might pop scrapyard and see what I can get!

Thanks again for the responses @Nodge68 and @Alibro, I slackened off the throttle cable this morning however the warning light pinged on again after say 12 miles, I was driving along straight road on this occasion in 5th and I'm pretty sure there is more than 10mm pedal movement before throttle...

I thought the more professional readers would be a lot more than that! I'm thinking about replacing my parts with second hand scrappy parts, for diagnostics if nothing else. Long term though a fancy diagnostics bit of kit could be useful! Would you recommend any particular manufacturers @Nodge68?

At @td4van I think I'll try slackening the throttle and if it comes on again I'll replace the throttle position sensor followed by the reverse and 1st switch if it repeats. My logic to that is the sensors will probably cost me less to replace than paying for diagnostics.

Hi! Thanks for the responses, that's a shame my new obd2 thing can't find the error. @Alibro I have had a look at the end of the throttle cable and there is certainly slack there, I'll try adding some more. The first time this happened was pulling away from traffic lights and the most recent...

I plugged in my obd2 today, one fault code which doesn't seem relevant? I think it was an old error because another app said it'd been there for 32k miles.

Thanks for the input! I'll check out the Rave manual. I've not got access to a code reader at the moment but I'll put one on it when I can! It's a 52 plate 1.8 by the way.