Just like gaylanders they look down & think oh my god ive got a large wee Extension where did that come from. 🤣 🤣 Edited afore eye get in the poo poo.

Trubble is... With a bit of sawing and welding old screwdrivers can be made into other special tools. I at the mo have tools in the garage here, in a room and tool box in Frogland and prolly the best ones in the back of the Disco. So in many...

Ive pulled my tool bag plus all the loose tools out the disco & got tools that ive never seen before, 3 snap on screwdrivers levers, new hex/alan key/torx bits set. couple of Halfrauds pro spanners 13mm & a 17mm. New blue metal punch. Wire...

Something I have to do, got a drawer full of screwdrivers, some of em broken, drawer full of many sorts of pliers, drawer crammed with odd sockets and breaker bars, same with another two (at least) toolboxes, all need a serious amount of...

Been in shed sorting out all my tools & evicting everything out my tool boxes thats not a tool, managed to do 2 drawers 🤣 🤣 Ive got some amount of useful stuff that I dont need atm :oops:

Hope they do a good job for you, tell em not to lean it off too much, might look good on emissions but the Mini loves fuel. It'll be fine, best of luck with it :)

... I have to report that I no longer have GWEN the mini. Awwwwwwwwwwwwwwwwwww. 😢 Because she's at the rolling road tuners. :banana: May get her back in a day or two later this week and maybe she will go like a :vb-bat: out of Hell or 💩...

Me upstairs water pipes come out me castle wall and all go into a plastic tub fing. It were overflowing when running out the baff. Full ov soap. Ran me baff out slowly and poked the soap wiv a stick to break it up. Roof down pipe runs into it...

Also got some weeds out me manc cobbles. Eye has used many different chemicals. Burnt em. Kicked the top oft. Bleached em. They still grow so eye lifted some cobbles yesdi to pull out the weeds and its root. Some have bin there several years...

Morning All. :D A bright and Sunny start here. :) Have a great Monday! :D

Yer bin sniffing round the freelander section. Finking of buying one? Yer know it makes sense rodney. @landowner confirm.

ditto but just used fertilizer then pumped water from main tank up to the allotment tanks just in time as it started raining, but still got wet 😣😣

Think im in the dog house ?? Not sure as not many words been exchanged this morning. :confused: I'll finish my coffee then bugger off outside to see what im going to do with that stripped stud. Just wondering if I can get the diff away from the...

D1 taken apart...front axle stripped, yup wrecked a halfshaft both shafts out. Need an offside one, diff still in as one stud decided it wanted to strip & not come out. :confused: I have spare HD raptor shafts but I aint fitting them as ive sold...

Cut me grass this morning. Then got ready to apply the weed feed n moss killer. But the instructions say don't apply until four days after cutting. So it's still in the sack.

Edgar gets a bit temperamental on a full moon

Morning All. :D Another Sunny one here. :) Have a great Sunday. :D

Spud manufacturerers wiv propper tratters

I did have a restless night to be honest :confused:

Full moon another restlessness night, any one else suffer with moon sickness , and no cracks about werewolfs Or ill bite you 😾😾

Squirrel fed. Left more nuts out now e's gone. Cut some of me naybors tree where it comes over the fence so e can run along the top more easily as an escape route.

Well..... just got back from the horribspital. 2150. With W. It took them till 2030 to tell her that they were not going to operate. Although I fetched her away from a surgical ward. They have done the square root of flip all for her, told her...

Just like a Freelander, only got halfway up the hill and they had to get out and walk 🤣

Mornin Cloudy bright and dry Off to a local car meet this morning and a pub breakfast :) Do I put my laminated info in the window or keep em all guessing ? Still looking for narrow Landy tyres 🤔 Might give church a miss this week, have a great...

bet you had a cold sweat doing that 😥😥

No, but they are perfect for a gaylanderer.

Part of job done, bit of a faff trying to cut a straight line with a grinding disc. Disc same width as the protuding hinge so bonnet will be same size when hinges are in.

Taking of them a lad along the road done himself with a 4" cutting disc, was cutting off a tail-lift & jammed the blade & it shot out nearly chopped his whole thumb off the grinder bounced off the lift & landed on his other forearm :eek: Quite...

----- and Grindr

Join mumsnet.... 🤣🤣