???

An hour tops, to cut and wire directly together. No more problems 👍 It would be handy to find out why it's disconnecting, maybe the wiring loom is in a bad position and it could happen again 🤔

750 +/- 50 mine idle at 800 rpm, less vibration.

Speak for yourself..............at least today anyway, who knows what tomorrow will bring :)

So I find that no fuel is coming out of the pump out hose (blue) though the pump is running. Somewhat unbelievably, the new in-tank fuel pump assembly I fitted is defective. I took it all out again and I saw that the fuel delivery pipe inside the...

Give it time, give it time lol.

Check for air intake pipes that may have come loose during the engine being tilted to accommodate the gbox work. 🤔 Any problems before the replacement box?

You need to take the caliper off and disc undo the back blate and move it round a bit to give better access then give head of that set screw a bloody good headache before you try again its a word of pain if you shear it off, give it some heat if...

Crows foot in the correct position or just effing tight. You feel it go when it's too late😜

Unlucky :rolleyes:

Oh why did I leave Sheffield :)

True too true:(

Had some of that, don't like the Klene Prep for clearing everything out but the lady consultant is rather nice. Bonne chance.

I'm in Mexborough hospital Wednesday for the camera into bowels. Yuk 😁

Somebodys got to !

Thars a good question 🤔🤣

yes it just pulls, on a ratchet type mechanism not sure about putting it back in place, just be very careful, they are easy to break

But what if its a Lady type gentleman, would it still cool the lady type gentlemans area the same ?

Just join them all together, an amazing result 🤯😜

TV module on mine did it.

I've got fish in mine🤷

the l322 comes with a flimsy sizer jack

Yera and mode Year and model of car may help

Fit the biggest battery you can find they dont like small batteries.

Thanks for the replies guys. Thanks for the doc links Marjon, thats really useful, as is the info about the manual on FullfatRR. I've made a start on putting it back together today, hopefully I should get it ready to bleed tomorrow. The battery...

If you look on the fullfatrr forum (yes sorry about that) near the top for "wiki" you can download the workshop manual from a link on there. Sorry to hear about your friend.

I did not have anything smaller

At least my back plate wasn't that bad to need 6mm !

Only if there's any plate left to bolt them into 😜

One dodge is to use 4mm set screws nylock nuts and washers to replace the retaining pins (and yes it's what I did having tried other options, it works ok)