You can get this one, which has an internal bar between drivers and 2nd row - Or this one, which is exactly the same, but without the internal hoop - My partner is adamant that she wants no internal stuff, but the external is the same...

I reckon, if it comes to it, I'll just buy one new. What bothers me in this plan is that, a while back, I mailed an eBay seller who's (complete) cage had gone unsold (id not seen it, else I'd have bought it). He told me he couldn't get rid of...

... still keeping my eye out for one of these.

The only person it matters to is you. The only person who knows for sure is some long retired quartermaster. In light of these two truths, just pick whatever you want. Nobody else on earth will either know, nor care.

We live in EX16, so I'd like to think we could come by. Assuming the FL2 doesnt go into limp mode too many times on the way there! If I tow it there with the 110, will the 110 get firebombed when I arrive? : )

Been thinking..... If I proposed Saturday 26th July, could folks let me know how many people might be interested?? Long distancers could pitch a tent overnight. Could organise a port a loo and refreshments. All depends on the interest. It...

Happy to donate use of a field if North Devon suits anyone. Date by agreement !! About 25 mins from M5 JCN 27. As it's a field you'd need a 4x4 🤭

Ive a friend who has swapped over to an electric car, and offered his processor up for sale on the various bio forums, and there was really very little interest. His setup was significantly more competent than may of the commercial offerings...

Ive got a bent pipe one by my feet right now - looks harder to change the matrix on than the straight one. I think the change over was at around 1994 (at the 200 to 300 change)

I got so sick of trying to trouble shoot it on the vehicle that i got it all on the kitchen table! Id swap the broken plastic things for a raptor unit in the blink of an eye at any point into the future.

You have to take the front off the binnacle - screws on either end and the base. Then the gauges have a screw and u shaped clip thing that has to come off. Make sure you pay attention to the black wire with the eyelets on it, and replace it in...

I read that they were all bad. I then changed the thermostat in the engine and the heat coming out of the duct holes is at the "hotness" where you can hold your hand under it, but any hotter, and you would not want to. As the OP notes, however...

I've just got some alloy layered to fit flush in the hole on mine (and another with a border to cover the joint on the inside). When I get around to it I'm going to bond the whole lot in and be shot of it for good. (I have a non sunroof liner...