Only thing I'm not keen on is arp studs. New stretch bolts every time. I certainly would put top hats in. Other things I would make assessments when there removed.
I would replace the oil pump/FRONT COVER as a matter of course.
The cam sensor and the injectors are connected as well. So when the cam sensor shorts it's possible to get continuity between 2 injector wires. The wiring diagram took some grasping as it's in several parts.
There should be no continuity between the cam sensor wires( I'm guessing until the...
I would initially just swop the injectors around to see if it helps.if it was a dead short it would throw a code also the misfires diagnostics are quite sensitive. It's tempting to blame the loom and it's fairly easy to change. Mine was terrible and I put a much better new one on but I think...
I have magnecores and there ok.basically better put together. Worth the premium asked....nah but definitely worth a bit more.
If it's turning over a bit before starting check the cam sensor
PS look carefully at the ecu I looked once and didn't see it. Second time I spotted it!
What I think made it truly difficult was I had to unplug the cam sensor then change the ecu ( doing the security thing) before it started working in any sensible way.
What had happened was the coolant hose popped soaking the cam sensor in hot coolant. This gradually shorted. Then Everytime I put a new ecu in the instant the key turned the track blew. Finally unplugged all the sensor I could and swapped the ecu. Much better.
It may be your diagnostics aren't working with the gems system. I'll relate my take of work( quickly)
A week after a hose popped off (after a major rebuild) I was left stranded about 10 miles away. It wouldn't start and after much messing and unplugging it would start with clouds of smoke ...
I seriously doubt you'd see much benefit. I doubt a big beam axle beast will suddenly transform into a disco 3. I reckon new tyres would make much more difference .
I put gen 2s on years ago I seem to recall the ride being more compliant now I know nowt else. I honestly wouldn't think any would be an improvement over any other and not worth stressing about. ( Buy the dunlops)
Mine has a built in device that tells me I'm cornering sharper...that bloody tray...
I'd try to borrow a nano or try to check if the lambdas are changing ie is it running closed loop.
Try the tps check it's values unplug it when it's running. Was the maf definitely good? Does your maf work on another vehicle. Unplug the cam sensor try and start. The maf doesn't really work until...