Still blowing fuse 3 with cigar lighter and glove box light unplugged. It has been working intermittently but is becoming a pain. I’m going to trace the wires but before I do could it be the headlight switch itself causing the issue it only seems to blow on switch on or off and possible random...

Thanks guys I’ll get back if I have no luck with some more information

I haven’t managed to actually download a copy of rave successfully I’m on Mac if that makes any difference. In short no I haven’t

It’s a 04 discovery 2 facelift Fuse 3 below the steering wheel. Thanks

I’ve been waiting on a genuine part for a week so hopefully it will improve more when it comes. Thanks though you are right.

Hi, I don’t suppose there is anyone who can simplify my wiring issue. My dash lights meaning the speedo rev fuel and temp gauge illumination keeps fusing. As soon as I flick the switch it’s gone. It’s becoming annoying not knowing my speed in the dark so would love some help understanding the...

Replaced waste-gate modulator and cleaned oil from the Ecu plug seems to have cured the problem :)

I haven’t but I will give that look at. Yeah I wish I could justify spending on one. Thanks for your tip I’ve something to try.

I’ve been experienceing random drops in power when on the motorway I’ve got a auto td5. The car struggles to move from around 65 and won’t rev. All of a sudden it will leap into action and is off like a rocket pulling though to 80 if I wanted. It’s mainly happening on hills and when overtaking...

Hi turns out my injectors hadn’t sealed properly when i replaced them. Brit part washers and o-rings were useless now fitted with genuine Land Rover ones and she’s running like a dream. Thanks for the advice all

Thanks for your reply, yes fitted new washers and o rings and adjusted the rockers. However on adjusting the rockers I found my manual confusing I read they need bottoming out ?? And should be set when that the cam lobe is at its highest point for that injector ?

Hi, wondering if anyone can help me I’ve just finished rebuilding my head after it’s been for a skim on start up it was difficult to get going. I had to purge the system quite a few times and charge the battery. When it started it was running rough and died when idleing. Any ideas I think it...

Hi I’ve got my head off (suspected crack) what do I need to remove in order to prep it for a skimming and testing ? Thanks

Update: so I decided to check the water pump, start with the easy stuff. This is what I found. Needless to say I treated her to a new one. This seemed to fix the issues I’d had! Success well short lived I did around 300 miles over the weekend in the lakes and it overheated on Monday eve on my...

I can look at that yeah not sure what to do but ill research. The Heaters always blew cold before HGR then i got a little heat after for a while. Now Blowing cold constantly,