Great, thanks 👍🏻

What is the best grease to buy for the guide pins on the calipers??

I've botched it for now but the car has lost a lot of power. Hopefully I can find one online

Don't suppose you know what this is? The pipe was looking tatty and I've snapped the plastic nipple trying to replace the pipe. It connects to the manifold

Ignore that message sorry you have answered it already

Do you know if the gasket on a 2.5 bmw is a full gasket or 6 separate ones? Thanks

I need to source an m8 nut because the manifold has been taken off before previously and noticed a nut missing the inside one at the end nearest to the windscreen. Either a bugger to bolt in or lost it taking the manifold at the time.

Think I will actually didn't realise I removed that many nuts off the manifold 👍🏻

Luckily the one nearest the windscreen looks good, I've replaced the others thou. Managed to pick up the kit which come with the bung if it did need doing.

Struggling to replace the long one pipe, having to take off the inlet manifold for better access. I hope these old range rovers are worth the bother. 🤣

Spot on thanks for your help 👍🏻👍🏻

So to remove the old pipes I just simply pull them off and make sure it's all been removed?? And the new ones are a push fit? Thanks 👍🏻

Thanks for your help 👍🏻 appreciate it