The plot thickens.

So, what I've discovered. The above chip in the instrument cluster holds the mileage data and probably other stuff. If you remove this chip and plug the cluster back in, and run the car, it resets the BECM mileage to 0. You can then refit or...

Thanks All. Spoken to a chap in Wales. Les Edwards. We have a plan 👍🏻

Sorry, only the instrument cluster will need the mileage reprogramming, resetting the BECM to ZERO is easy. After the correct mileage is programmed into the instrument cluster, the BECM will automatically update to the cluster figure as it will...

It is possible to force a reset to zero but you would need EPROM programming equipment to insert a mileage number. As said, best just keep a record of the old mileage and new mileage at the point of change.

I did some scrolling and found the below old thread. Which I've copied and pasted. Following that and looking at the inside of the clocks that contains accurate mileage, I can see the 24 pin memory chip has been desoldered and plugged in. I'm...

Oh no!!

Hi all. I have a p38 that was imported into the country from Japan some time ago. It's a 4.0 petrol. It looks like clocks with close-to equivalent miles/km was fitted on imporr (mot miles to km adds up) but it's a diesel binnacle so the rev...

If you choose the right after-market stereo it's actually quite simple. Get new stereo with Front-LR, Rear-LR & SUB Phone line level outputs. Must be five outputs. Buy the 10-pin connector & pins from Nexxia or wherever you find one. Find 5...

You're right! That's why i'll release a commercial adapter for the P38 Harman Kardon as some companies do with Audi and Bmw... I'm currently testing it on a Alpine HK too