Hi all Can I use MANNOL Dexron III 3 Automatic Transmission Fluid ATF 8206 in a discovery 2td5 auto box. I already have 10 LTR's and was going to do it today but want to be sure it's OK. Thanks for any help. Stewart.

Hi guys can I use MANNOL Dexron III 3 Automatic Transmission Fluid ATF 8206 in a discovery 2td5 auto box

Hi Sierrafery I put the ecu from my auto in and the fuelpump did not run and the engine light and glow plug light still did not aluminate, it was an ecu from an auto put in to a manual though.

Hi Sierafery When I pug in the nanocom It communicates wit the BCU and the slabs, but not the ECU.

Cheers m8 guess he never fixed it then.

Hi Gary Did you get to the bottom of this , I have the same problem? Stewart.

Hi Anaconda I can't get any communication with the ECU on Nanocom.

Hi all As above, I have 2 td5's and have changed the ecu relays and fuses bridged the cut off switch on the bulkhead to no avail. Any help very welcome thanks in advance. Stewart.

Did this work out? Stewart.

Hi all I done mine 2 days ago before reading this and can confirm that any aftermarket ones are crap got a set off engine mounts and gearbox mounts in all makes boxes and the vibration at idle is terrible. After reading this I have now ordered a set off engine mounts from Craddocks KKB500750LR...

Yes will be doing that as I'm not going to be towing anything anyway.

Sierrafery The wires went to the wiring for the tow bar. Yes Marjon it did have one but I took it off about three months ago when I fitted my Wildbear bumper.

Not got a clue just chopped the wires and shrunk the ends. Was not at the garage will have a look latter when I have the time.

Yip guys Someone had fitted a sounder, it was scotch locked on. Now disconnected one of the wires in a scotch lock had came loose. All's quiet now. Thanks for the help.

Hi Sierafery Can't figure out my phone but it sounds like a forklift reversing, its coming from the rear right hand side.