I am sure, i actually did it my self, hehe. :D Leak test and all, everything was fine. I work at a collision repair shop. Clutch works, blend motors move, cleaned the condenser. (fans have not kicked in tho) I quess the pump is bad, since the...

If the AC pipes are properly hot & cold, also check the Aspirator fan next to the clock, plus the Evaporator & Heater Core sensors. Evap sensor is pushed into the right side of the heater box near the bulkhead. Heater core sensor is clipped...

Check the aircon pipes under the bonnet, one should be very hot the other freezing cold. If they are OK could be a blend motor problem, I'm assuming it's a P38. If the cold pipe is not very cold, check the electric fans work and that the...

Good luck with the air condition! I just used my lunch break to fix the rear bumper cover. The new exhaust gets hot, and it almost melted the olastic cover, enough for it to come loose at the clued / pressed in metal bits that screw on to the...

i do not. You are correct its a p38. I'll start with that, i have moved the trans oil cooler in front of the ac condencer. Never heard the fans turning on tho.

Just got the AC recharged, still not blowing cold. Cool air, but not cold. :( Maybe the compressor or the blend motor/distribution flap is bad. Got any tips?