cheers station house

that would be fantastic if you could post up a pic of the fuse list thanks in advance

LOL....i did take the fuse box cover off first before posting...its just the glue there mate where this useful info was once was stuck

hi can anyone point me to the link for fuse board list....i did a search but cant find a list of what fuse does what...its a 110 with J19 engine that i have if it makes any difference cheers in advance

yep that'll do it....cracked the lot eh? did your mech' give any reason why or how this happened....wouldnt want another one to go the same way

looks as if its the gasket/head then...do check you dont have stripped head bolts that dont screw down tight enough, i had a vauxhall that blew white smoke and looked for all the world like a warped head but infact some grease monkey had stripped a thread on a previous occassion and not knowing...

we tape all our sunroofs up with gorrila tape...very long lasting and durable as you state its the plastic to roof joint that leaks shutting the doors fast tends to inflate the cab / flex the roof at that point so all tape will give out in the long run my pal says welding on a plate is not a...

welcome :) not a caravanner myself but if towing dont go above 55mph or you might have very nasty bunny hopping/fishtailing as happened to my friend...he lived to tell the tale but lost 1kg in sweat...i'd think your tyre pressure is your starter too low and you could have side walls caving in so...

little bubbles could be matrix on its way out (condensation in the cab / on the windscreen is a sign of failure) but head gasket too causes the same...you can get a gas sniffer to really be sure...as to skim only do this as a very last result...get a high quality dead straight rule first...run...

this can be a right pain i had similar issues with large jap engines getting airlocked like this esp in the matrix area....we used to fill them on a steep slope rad neck highest up....you can always jack the car up as well if you live in the fens etc :) then with rad bleed screws out and...

call my mate alan on 07930395013 he will sort you out, fair warning he is always busy so might have to wait but he is expert welder and commutes from south coast to your area most weeks. cheers chris

are you still breaking these lumps guys? UPDATE All sorted now got spares off a local breaker today

round here there's a very large LR population it goes like this the 110's all wave to each other (even grizzled old farmers join in!) the 90's dont respond 80% of the time (have their own wave club i reckon) and the discos (even tricked up ones) forget it nada...ziltch and all the series owners...

cheers to all for the welcome....cake yes anytime you're passing i'll bung the kettle on :D

I feel for you mate, my friend who works as a landy service engineer said to me (some years back) if i ever bought a p38 he would never talk to me again all the best with your sale