Funny how "I might as well do this at the same time" leads to multi-day work projects. After finishing the installation of the Roamer OD, I thought I'd add some heat/sound insulation to the bottom of the centre seat panel, which lead to doing the...

Finished installing the Roamerdrive OD and took Winnie out on a test drive. I can finally reach 80kph, and it certainly has reduced the sound levels and tone. I realize it will take a while to properly "bed in" but so far I'm very happy. I'm now...

My welder guy and I fabricated a rear bumper with receiver, which also acts as the step support. Without all the brackets, it makes getting in/out a lot easier. I also picked up one of the remaining Roamer overdrives in Canada before...

Thankfully my welder guy has a lot of experience with soldering, so I'll get him to do the repair properly. It did give me the opportunity to take the rad out and give it a proper flush.

Good day, Went to drain a bit of the coolant out of the radiator from the lower valve, and it immediately started to leak. Felt like something was loose, then the bung came out along with the valve. Luckily I had enough containers handy to catch...