Injectors have been recoded to each cylinder.

I've been running live data on my Face-lift L314 Td4 Fuel compensation is showing the following reading Injector 1 14.58mm3 Injector 2 8.54mm3 Injector 3 14.50mm3 Injector 4 13.68mm3 I'm using Launch X431 V2.0 for landrover. Some information found states my injectors should be reading around...

Mine is an Auto Late 2006 FL Td4

While running the DTCs and exploring other modes available on my 2006 L314 Td4 I've switched the Cruise Control light on, could this imply the ECU may be capable of having Cruise fitted ?

I've capped off the small vacuum hose, my car is now throwing the Engine Management light.

It's strange how they're still using rubbish cranks in the new Discovery Sports :( I was in hte market for a new one until I found they come with the ingenium engine that's rubbish. Going down the MB GLS route now

I've replaced both the Crankcase breather with the BMW upgrade and a Performance filter (Not K&N) and find the car runs smoother and smokes less. At the moment I cannot say if this is due to the repairs ive done, will report back All Injectors rebuilt plus seals (Contrary to what seems common...

As the M47R's crank is cast couldn't we simply swap the crank out replacing it with the BMW's one ?

Will be fitting the new air-conditioning condenser Yesterday cleaned the plastic headlights, who knew they're clear without a yellow hue at the top. Fitted an EGR bypass, original one doing less than nothing (see image) Removed the Xenon box, it was doing nothing (see image)

I'm the process of fitting an EGR Delete to my 06 Freelander Td4. Do I cap the little vacuum hose off or just leave it ?

Launch X431 will read most things, even makes the rpm needle to jump (much to the amusement of the mini ones

Loving the Launch X431 with the Landrover software. Found old codes my cheapy Amazon one couldn't. Thankfully there's some historic ones on the transmission

Do you think this might need replacing

Had a similar with Evri. Newmarket doesn't sound like Norwich? Apparently it did to them

I've removed the cracked aircon condenser. Had to remove the drier tube to access the lower fixing bolt. Refitted the cleaned out intercooler. Next job is to fit a pair of gas struts to the bonnet. Being a wheelchair user the stock bonnet is too cumbersome to latch with the stock holding rod...