Don't muck around trying to sort the locking nuts out, just get 5 Freelander wheel nuts from a breakers and get those locking ones taken off.
Miraculously, my local stealer removed them free of charge, I followed him round the car putting the...
Good suggestions above.
Which solenoid? I presume you mean starter.
There is a fuel cut off solenoid on these I believe on the bulk head. Might be faulty. I believe you press to reset it, might be worth giving it a press and seeing if the...
Ah yes! I saw these a while ago, but it looks like they stopped developing them and only have the fronts left in stock, I will shoot them an email to see if they are available upon request :)
I think @htr used springs from this outfit...
https://dobinsons.com/
On their site, they quote a 30mm lift (more travel?) but I'm sure @htr said he got 20mm.
£50k for a Cherry.
Yeh, fook right off.
Ali's decent proper Freelander is much better value at £50k.
Or, for £50k, you could buy a decent proper Freelander and a lifetime of diesel.
The odds are that the VCU is knackered if its never been changed.
However, also make sure that the car has been maintained with the same make/model of tyres on all corners as a mismatched tyre has the affect of 'engaging' the VCU because the...
This is true, but it won't be 'freely' because it will also need to turn all the props, 2 diffs and another wheel. So it won't be like spinning the wheel on a 'normal' car, but it will turn quite freely.
Thank you.
Have since removed the master from the car and "un-built" it 😅 Following removal it looks like the seal for the fill under the actual container was very cracked leaking and just falling to bits, some other seals were good and others...