I work at a scrapyard so we do get a fair share of end of life vehicles but this was the first 3 door Hippo since I’ve been there.
Been waiting for one for ages, kept thinking I had to buy a couple of tyres then got lucky.
Still got the sports...
I take it you work at a breakers yard?
Or did you just buy some bits off someone who turned up at your place of work? How did they get home? Do you try to get other types of parts off your customers, kidneys, livers etc? :D
Going by your...
I posted on 16/03/25 smugly about replacing my starter motor. What a fool….
Three days later the new one stopped working altogether. So after much cursing, blood sweat and tears put the old one back in. Started first time and continues to work...
My main thought is that it was a rather useless auto electrician.
Second thought is that its nothing to do with brakes if the fuse is for both reverse lights and brakes... and it happens when you put the car in reverse.
Does it do it if you...
An AWD fully functional F1 is obviously the best way to use and enjoy the car.
However, my F1 has been giving great service in 2WD for a decade and is still going strong.
I have just removed drive in the IRD to the rear pinion, so I'm carrying...
That's an awesome pack you have there.
Hope the fuse sorts the problems. Great call from @pscan.eu
Please accept my appologies for saying this is a great thread... as its causing you grief....
But its part of what makes LZ so great and I...
Thank you all again for your answers!!! That gives me really hope again!!!!
So I will try to get such a fuse and hope for the very best... If I got one (not so easy here and in my situation) I will report directly if that was the sollution. Thank...
When my L Series started strange misbehaving starts it was due to electrical spikes.
I disconnected the battey for 20 minutes to let the ecus clear and reset themselves. It was fine after that.
Good luck.
Just a wee update on driving and charging.
The car has been driving great since the 12V relay module was replaced. :D I've only driven around miles 60 since but it's been flawless. TBH I had always questioned the wisdom of using ultra cheap...
Here it is for a facelift. Power comes from position "1" on the ignition barrel (I don't know what that means), through F6, through the inhibit switch on the transmission, and in to the immobiliser.
If the vehicle starts then it's probably working.
I don't know anything about your problem, I don't know how the auto box works, but you say "there is no power to the inhibitor". Looking at the circuit diagram, the "INHIBIT" within the 'SELECTOR" looks to get power from fuse F35 in the...
Just to update those taking interest, I removed the fault codes and recalibrated the gyro, having remade the connection next to the handbrake. Today I’ve started the vehicle twice and driven 10 miles each time on a mix of rough dirt terrain (I’m...
If you download the Rave workshop manual there is a section that has pictures of all connectors with a description of where they are...
https://landyzone.co.uk/land-rover/rave-disk-maintenance-manual.260227/
The connector for that relay (C1976...