Yea your right there, I knew it had to be mechanical, as the inlet swap involved injectors out and refitting. They wldnt listen and thought it was electrical, trust Siemens to build an injectorthat cant be refurbed, shes running now, well i hope once i try and get this dipstick guide tube refitted.

Yea sure was Mark Felt i was never going to get there. Trusted experts who diagnosed the wrong fault, stuck to my guns and tested the injectors, all failed. Ordered 4 new obes and they sent me 4 but 2 were wrong, waited another week foe the replacements, finally get it going now i need to...

Yea was delighted considering fully qualified experts were at it Just the dipstick tube to navigate and is good to go

Update. After replacing the 2 wrong injectors i wws supplied, I fitted the 4 new injectors fitted today, system bled ( took a while ) then a bit of coaxing on crank and she fired up. Gm White smoke from drivers exhaust which eventually calmed down, suspect its fuel burn with moisture. Was...

me too mate, yea lesson learned bigtime

Hi All good thanks, hope all is well with you!! Not daft at all.. No they are not coded to port, or have difderent ohms etc, the difference is positioning of connector, fuel rail insert and leak off pipe. You can swap banks on the V8 though ie bank 1 with bank 2 1-8 2-7 etc. Cheers

if only, rather insert my size 10 up his anal hole :)

Not out of the woods yet, need to replace the 4 blown with new ones then see if it fires up.

Yea definately upon removal / refitting, fault lies with mechanic who replaced the manifold.

I thought maybe it had blown when mega fuse went, got it tested and it was fine. Yes it is hurting to pay 1k for 4, but car needs to be running so i need to bite the bullet as they say.

Would hazard a guess at cery unlucky, as 24hours prior to removal they were working perfectly. from them being removed and regitted they have failed.

Update After replacing my ECU with a cloned one, still no further forward. Tested the electrics, found current and pulse at plugs etc, decided to go back to the source prior to the repair, removed the 4 injectors and sent them for testing. Result ALL 4 FAILED ELECTRICAL TEST., from 24hours...

Great job fella, was thinking of tackling this next but will give it a miss lol What location is the crank sensor? Cheers

yea but what was the cause of why it wouldnt start!!

Hi Sarah Did you ever get to the bottom off your issue? Cheers Gerry