Buy a block off a breaker, dismantle, get all 6 holes drilled with flats inside to handle 1/4" BSP.
Swivel, 2m hose, 14mm banjo ,x 4
Pump short pipes 3/8 BSP to compression fittings on the cut off pump pipes.
Thanks Stanley, just found it in my manuals, so yes , as for the problem as you say sounds like a hydrualic lifter gone best to fit a full set if you can get them at a resonable price
Rimmer sell these OEM
Hydraulic Tappet 24mm Height (16...
the engine is a T16, The Rover T16 engine, a development of the M16, was used in a variety of Rover vehicles, including the Rover 820, 200/400/600 series, and 800 series, as well as limited-run models like the 220/420 GTi and GSi trims. It was...
I bought a second hand one from this forum as it was already has Discovery td5 installed it worked perfect, and I have the option to add more packs if I ever need them,
I had the same issue with my Motorhome, the slightest touch and it would shut down, plus I had trouble starting it in cold weather as the key would not stay in the correct position it constantly turn anti clockwise and shut down the glow plugs, I...
Don't know the D4, but is there no chance of draining the sump via the dipstick hole?
I have been doing this on my D2 for a number of years for precisely the same problem as you have. It works fine, if a little tedious.
No one seems to have...
Mot fast approaching so booked in for Friday, so I replaced a damages front door, (Banged up) the welded up the rust on my front windscreen (Bad Winter), only to get the 3 amigos for the first time, which the lead me to get a used Nanocom, from a...