having issues with a disco 3 speedo stopped working park brake showing fault and hdc system fault and abs warning lights on , battery is good only 1 year old ! Any ideas

It's £350 fitted and setup parts were £100 roughly.

£350

They are doing the alignment in with it.

Will get you the part numbers.

No just one side unfortunately, may have to look at sorting the other side my self!! They did initially say new EPB, then had the good news that the cables can be changed!! I was also told by a LR Specialist that the EPB was shot and needed replacing.

No according to Land Rover dealership they can get a cable kit. MOT are footing the bill for the bush coz they missed on MOT.

We have the verdict!!! Drivers side rear cable has snapped. However the most worrying thing is the MOT tested failed to identify a collapsed bush on the rear upper suspension arm!!!!

Hi, it's actually free and drivable, the noise seems to be coming from the actuator when it's trying to apply.

Already have, the MOT station have arranged for the car to go to Land Rover dealership tomorrow for inspection and report on what has happened and from that point admit deny liability. A Land Rover specialists advised me that the EPB module had failed which was making the noise??

Thanks for your advice.

Just thinking on it had new rear discs and pads 2 months ago so would have been adjusted at that point.

Thanks for the info, would you say that the MOT tester could have caused the EPB to fail.

Ok, it's used when parked and I would say 3 journeys a day., and when setting off from junctions on a hill again maybe 3-4 times a day,

hi, it flashing red on the dash and if you try and apply the EPB it just keeps making loud screeching noises !!!