I ‘spose we’ll allow ‘honorary’ visitors from Cornwall too…?

Been thinking..... If I proposed Saturday 26th July, could folks let me know how many people might be interested?? Long distancers could pitch a tent overnight. Could organise a port a loo and refreshments. All depends on the interest. It...

Must have been burning tyre rubber…

Hi all, Thank you for your replies! The defender we are talking about is a 90, year 2003 and they want €17,500 for the car (in the Netherlands). I think it is better to look further, but I am not sure yet....

Happy to donate use of a field if North Devon suits anyone. Date by agreement !! About 25 mins from M5 JCN 27. As it's a field you'd need a 4x4 🤭

Thanks for all the info. As above, oil in bores puts compression back to where it should be so worn bores or broken and worn rings I guess. Today, loosened off all the bits to come off ready. Drained all fluids, removed everything that I could...

I don’t know of one, but if there is, I’m up for it…

…Guarantee if you turn your back, those 10mm ones will disappear

I'm pretty good at loosing everything so the first thing I did after building my garage was screw this board to the wall and hang my spanners in full view. I still loose them from time to time but usually not for long.

Having a look at trail wise and found it a bit helpful. Some lanes I had looked on the OS map have TRO/VRO or advise to only go 1 way. Yes some of this info goes back a few years,so a sites is only as good as the info supplied Still route...

Hi J. It's easier to get to the part by taking the manifold off, that should take no longer than 30 minutes, from there you wil be able to unbolt the Y connector. They get brittle over time and can leak it's very rare it's the hose, but of...

I thought I was bad at this sort of thing, till I started current job. Stuff just vanishes - everything. We use scales a lot, and they could never be found. So 4 were bought. 4 screws screwed into the wall that they hang from and that is...

Nice truck. I’ll check the sofa - I’m only 21499 short!

… Both!

Hi all, New to the forum - I'm in the Canadian Arctic, but I'm a born and bred Brit having spent the first 22 years of my life in the home counties. Cheers, or as we say in Canada 'take it easy, eh'!

Dunno, didn't get mine fixed. And I think it was a tendon / muscle attachment (not ligament) from upper to lower arm. Happened when I collected an off cut of worktop from a DIY store, arm just went "POP" and hurt like hell. Managed to get the...

I've just made up a remote crank cable. An old starter relay with a 2m cable connected across the contacts and a 10A push button. Simply flap open the engine fuse box and swap the relay for the test lead and cranking by button and you can watch...

That’s one of the laws of the Universe: Crap expands at an inversely proportional rate to the space made available for its retention.

Along with the formula for the availability of a 10mm spanner in your shed/garage/toolbox at any given time; n-1 Where n = the amount of 10mm spanner’s you have bought