Thought best starting a new one as different topic. 😊

Hi there, A friend of mine has a very big air compressor and blasting kit/gun. I've been researching and I've been reading soda blasting is good, which gives a good finish with the benefit that it doesnt wreck rubber or wiring etc. Or do you have to cover rubber hoses and wiring? If so with...

Quick update - a friend of mine has a very big air compressor and blasting kit/gun. I've been researching and I've been reading soda blasting is good, which gives a good finish with the benefit that it doesnt wreck rubber or wiring etc. Thoughts on any different media? And couyld you also use...

Never knew you could glow in the dark fluid for oil and fuel - that is genius! On it!

No faffing - just curious. :) Are they like mirco relays?

Also what pin is what?! lol

Just found the spare relays - seem smaller than the usual? Will they do the same job as the ones currently in or are they completely wrong?

Does it come on a YouTube video? :)

#Awks

So you rub down the metal first with a pad, and then just paint/spray the 80% phosphoric acid on?

So is there much difference in products or is it all near enought the same?

Thinking on... while I've got the door card off as well as the other bits, I might as well add some sound deadening. What would people recommend, thats great functionality as well as great value?

Thanks for all the great feedback - so this weekend managed to get the power washer underneath it. Alot of muck... to which I had then turn the power washer on the drive! Also took a pad on a drill as suggested further up the thread - which works well. So next question(s) are how do you manage...

So problem explained - it turns out to be the motor! New part on the way, though would loved just to have bout the motor, but with the mechanised stuck on down, I couldnt get to the third screw - unless you wily foxes know something I dont... which is highly probable! :D

I have no idea of what the 2 fuses are connected to the battery - whats the best way to find out? I think you are bang on with the previous owner and doing their own mods! I've taken the door card off, and checked the wires between the door and cab and all seems fine. So next thing is to...