My cd player keeps playing up, says no disc when there is, stripped it down twice in my 3 years of ownership and it works again even though I can see nowt wrong through my untrained eye and I haven't adjusted anything. Got a good , apparently...

Calibrated the ride height. What a palava! Eventually got there and it said some sbs ecu or other needed to learn something about longitudinal and latitude values out of whack.. but it passed and completed ok!

Swopped over the master pushrods and all is well again. Had some issues bleeding the clutch but got there in the end, all back together and a limited test on the drive has given me good rev and first gears again. In case someone does a search and...

When Mr Haynes says tap gently with a soft faced mallet, usually means knock seven shades out of it with the finesse of someone with sledge hammer tourette's

Thank you to everyone for your replies. It's now off. A combination of 2 blow torches and a larger hammer(sledge) and couple of well placed whacks on the face broke it free.

Yeah, if I had a totally knacked wheel I would have a go at recovering it then on to a pro if I couldn't get it right. This one has a few nicks and a fair bit of wear, mainly on the back, so it's worth a go with the restoration kit at £25. It's...

Plenty of videos on yt.. a few sorting you how the folks do it with the right tools too.. night and day.. but i think with practice you might get a decent job.. but you need the right twine.. right needles etc and pre punched holes to get things neat

Looks straightforward enough to DIY to me. Looking closer at it...it doesn't look unfeasible to remove the leather and use that as a template to cut and sew on new stuff. Plenty of saddlers in Shropshire would probably have the gear and skills to...

If you want a professional job I'd recommend Royal Steering Wheels in Aylesbury. Had a Saab 9-5 steering wheel done by them and was amazing finish. Bit of a trek but could post as an option. Or I pass by that way often and could LRFerry for you.

Kurt had a stash of NRVS but not seen him for long time. I have a set here somewhere but they are not new. Decent enough for spares. Welcome if you need them

I feel your pain, one of the reasons I fitted a disc braked axle to my 85 110. I used 2 large flat bladed screwdrivers behind the drum 180deg apart and put pressure on them (probably need another pair of hands) then smacked the outside of the...

Look what I've got hold of! Wood is good, leather is damaged and the wrong colour but I've ordered a repair kit so see how that pans out as I've never done it before.

I have to run up and beat the dog to my space..........

That's all most of us do at bed time now.. :vb-lol:

That type fuse and fuse holders are notorious for making a bad contact. I would replace the blown one after disconnecting the batteries, removing all the fuses and cleaning up the fuse holders and fuse contact ends with some wire wool or...

The clutch fork is an item that went downhill when the coilers arrived, Series 3 had a cast item with a nylon bearing for the post. So called heavy duty [ extra bit of metal welded on the back of arm] available. Problem I have had with a...

That will be it then :eek:. J

Pivot was fine, welded the arm up with an extra thick plate for insurance. Spent what seemed hrs trying to get the box mated back up but got there in the end, bolted that back up, refitted the slave and tried the clutch...no pressure at the pedal...

Well top and bottom knuckles changed both sides good job @Flossie I took the sensors, they were used.. Both bottom knuckles were worn. Also left hand tyre was deformed on tread. Ended up buying four new (well old new) wheels with tyres for £60...

Should know late tomorrow if it doesn't pee it down.

New master and slave fitted, bled and bled until I've got constant fluid coming through with no air . Pedal goes to the floor with no resistance whatsoever. Box has got to come out, bugger!

I've taken 2 abs sensors with me just in case ;) ;) 👍

If you dropped it off for me to do, I'd still be trying to get one of the abs sensors out later this afternoon. Car would be ready to pick up, all sorted, some time in October. :vb-lol: :vb-groan2::vb-groan2:. I proper struggled.

Dropped the Rangie off this morning to have the steering knuckle joints changed . Should be ready later this afternoon for pick up

Bought her a nice new R/H front indicator cluster. Checked, double checked, checked again and bought the correct one. Only I didn't. I bought the L/H 🤦‍♀️🤣 but it's ok. It can go in the shed until needed 😁

Gears, mainly 1st and reverse were getting hard to engage for a while then suddenly got worse, especially reverse one day, then...weirdly...it was OK again on the same day, crunching then..no crunching? Next day(yesterday) it started crunching...

Not used the 38 for 8 days I think as i needed a work horse as i had a house roof replacement to do so used the 110. Battery flat on the 38 this morning so that's on charge and decided to fit the new genuine tailgate seal. The difference in soft...

Measure the height of yours, early ones are longer, I've fitted an early one to mine which had the later nla originally. I can then go measure mine to confirm what you have. Not sure if it's possible to measure the overall height with it fitted...

Just throwing it out there..... Only one connector on the switch pack, maybe its come away? Worth a look. Side cheeks off, 2 screws each side, open cubby box, 2 screws there at the top front. Be careful!!! Plastic tabs break off if your heavy...