New master and slave fitted, bled and bled until I've got constant fluid coming through with no air . Pedal goes to the floor with no resistance whatsoever. Box has got to come out, bugger!

I've taken 2 abs sensors with me just in case ;) ;) 👍

If you dropped it off for me to do, I'd still be trying to get one of the abs sensors out later this afternoon. Car would be ready to pick up, all sorted, some time in October. :vb-lol: :vb-groan2::vb-groan2:. I proper struggled.

Dropped the Rangie off this morning to have the steering knuckle joints changed . Should be ready later this afternoon for pick up

Bought her a nice new R/H front indicator cluster. Checked, double checked, checked again and bought the correct one. Only I didn't. I bought the L/H 🤦‍♀️🤣 but it's ok. It can go in the shed until needed 😁

Gears, mainly 1st and reverse were getting hard to engage for a while then suddenly got worse, especially reverse one day, then...weirdly...it was OK again on the same day, crunching then..no crunching? Next day(yesterday) it started crunching...

Not used the 38 for 8 days I think as i needed a work horse as i had a house roof replacement to do so used the 110. Battery flat on the 38 this morning so that's on charge and decided to fit the new genuine tailgate seal. The difference in soft...

Measure the height of yours, early ones are longer, I've fitted an early one to mine which had the later nla originally. I can then go measure mine to confirm what you have. Not sure if it's possible to measure the overall height with it fitted...

Just throwing it out there..... Only one connector on the switch pack, maybe its come away? Worth a look. Side cheeks off, 2 screws each side, open cubby box, 2 screws there at the top front. Be careful!!! Plastic tabs break off if your heavy...

I bet thay are not 2 neutrals one will be a live feed as you said it was 2 way thay just used the incorrect coloured cable for the 2 way connects? Just got to the end glad you got it sorted 👍

That light, above, isn't two way switching, that was the landing light. The two wires in that light, above, were both neutrals , loop in and loop out, live was red ,switched live was black (red sleeving) both from the one way switch. All the...

It was the two neutral wires from the next bedroom causing the issue. They were both just 'resting' in the choc block, screw was loose, everything up and running again and relieved that I didn't have to go up in the itchy loft 😬 . The offending...

Live terminals were all correct right up to the bulb contacts, only 1 neutral on the landing , 3 terminals there, 1 from the loft space and , of course, the neutral tail from the lamp cord, @mystery has sussed it methinks. Find out tomorrow...

more info please but assume the landing light last on circuit,the bathroom light should have 3 neutral wire (fan, landing and nearest bedroom) and the bedrooms should each have two neutrals so would look at bedroom nearest to bathroom for...

I think you're right. I thought all lives, neutrals and earth's returned to the consumer unit as a ring circuit on both sockets and lights. It follows that the landing light is the last in the non returning circuit hence only one neutral. I'll...

Mates house..he's lost the landing light and the bathroom light , they are next to each other maybe 8 foot. Landing light is two way switching from downstairs. I know enough to get myself into trouble! Anywhoo, the other 3 rooms upstairs still...