Can anyone tell me the best / easiest way to remove the doors.on a 3 door FL1 ? Looks like I could knock the pins out of the hinges or ... with some awkward spannering ... maybe get to the bolts that remove the hinges from the monocoque. Perhaps...

Cheers, great information

Hi Right, currently tidying up my project FL1 commercial (53 plate). It was on 15" steel wheels and I wanted something a bit cooler so bought these 6 spokes today (size 7Jx17CH or GH? - see pic) from a slightly later FL1. I read they'd fit, hope...

Cam sensor is my best guess from what I read. Doesn't always generate a fault code so beware. Freezer test is easy and worthwhile.

I’d vote cam sensor too. Had the very fault myself!

I’m near Ashford. Happy to arrange something if it helps… PM me if so. I have the Pscan system.

If you suspect the cam sensor, easy way to test it would be go for a drive, when you get back home and try to start the car after 5 minutes does it not start or struggle to start, ? remove the cam sensor which is easy a 5mm small socket is your...

Slight hot start issue. Have read it could be cam position sensor or potentially the HP fuel pump, maybe even injectors. I'm capable of doing leak back testsor doing whatever work needs doing but I want to try and get a heads up from diagnostics...

Hi Got a hot starting issue developing in a Freelander 1 2003 TD4. I'd like to eliminate a few things with a diagnostic tool if possible. Feel like I could check the cam pos sensor and get some fuel pressure readings from the right tool which...

Sorted! Really appreciate the advice and next level explanation, pictures, part numbers etc, class mate, thank you! John

Ok found the time to do the job, easy with your excellent instructions, thank you. That Y piece had been 'siliconed' to the block presumably to try and stop the leak. Cleaned it all up and refitted the replacement. It still leaks!!! However, I...