• ER1C
    ER1C replied to the thread Roll cage to support expedition roof rack?.
    Found this one which helps...
    • 1744028834525.jpeg
    Apr 7, 2025
  • ER1C
    ER1C replied to the thread Paint Removal.
    Yeahh it is the yellow stuff i recall doing rooms with that in rentals in my uni time when trying to get nicotine stains off the wall.
    Apr 4, 2025
  • ER1C
    ER1C reacted to Rangieman123's post in the thread Paint Removal with Like Like.
    I have used sugar soap to soften paint in the past. Not sure if it's available anymore.
    Apr 4, 2025
  • ER1C
    ER1C replied to the thread Any advice for novice welder about to stitch new rear cross member to 90 chassis?.
    Very good question, my gut says you will have to come from above, I vaguely remember my chap had fuel tank supports etc to replace whilst he did it so there must be space, I think the rear CM curves down at the point they replace it.
    Apr 4, 2025
  • ER1C
    ER1C replied to the thread Roll cage to support expedition roof rack?.
    You are wise to be concerned and query. Imagine if 2/3 of the weight were at the front on one side it would be on 1 support on the gutter really. But you are also right the feet you have are wider than a lot out there. I would take some...
    Apr 3, 2025
  • ER1C
    ER1C replied to the thread Roll cage to support expedition roof rack?.
    All good points..... Keep in mind when you are sleeping only "some" weight is on the roof as the ladder supports a lot of it. I would in order. 1. Support the rack fully along the gutter 2. Get as light a rack as possible 3. Even the load on...
    Apr 3, 2025
  • ER1C
    ER1C reacted to Freddie17's post in the thread Roll cage to support expedition roof rack? with Like Like.
    Sorry, I’ve no idea, but tell your wife about the weight comments and I reckon you’ll save 80kgs 😁
    Apr 3, 2025
  • ER1C
    ER1C reacted to lynall's post in the thread Crankshaft failure. with Like Like.
    Defenders are well known for being totally fault free:D
    Apr 2, 2025
  • ER1C
    ER1C posted the thread Disco 4 (LR4) Why so cheap in Land Rover Discovery.
    https://www.ebay.co.uk/itm/365332939918?_skw=discovery+4&itmmeta=01JQVDR61BST95GQ7FE0BRP3BT&hash=item550f8a448e:g:7KwAAOSwExRnhqVQ&itmprp=enc%3AAQAKAAAA0FkggFvd1GGDu0w3yXCmi1eCCdG5qW4icjI0FHAvoXvqrrykaiDW0F0qRBEeA9%2FqrLPbr68njZ9c7WvaBYRiE9mLeURO9...
    Apr 2, 2025
  • ER1C
    ER1C replied to the thread Diesel/petrol mixed fuel.
    I believe you can separate them if you want to..... When I cleaned out my tank (Petrol) and I had waste oil which I stored in the same container, I took mine to the tip and they said to just dump it in the waste oil tank which scared the **** out...
    Mar 28, 2025
  • ER1C
    ER1C replied to the thread Why are parts so crap these days?.
    Its the same everywhere :(... .I am restoring a 45 year old classic and the reproduction parts are ****e..... with the exception of rubber which perishes over time the seals, o rings and fittings from the original vehicle re-fitted are better...
    Mar 28, 2025
  • ER1C
    ER1C replied to the thread What have I Done !!!.
    Welcome brother :) Looks lovely and I am sure she will do you proud.... Stick with it and get posting when you have issues or just to see progress. Both my vehicles have been late night purchases, and both bad ones to a certain extent but...
    Mar 27, 2025
Show older items