• discool
    discool reacted to Datatek's post in the thread P38A Horn connector with Like Like.
    Anything can be cut out with a Dremel, it's only a plastic moulding
    Apr 1, 2025
  • discool
    discool replied to the thread Disco 2 Why is so much heat coming on the drivers side from the console?.
    All you will find regarding a heat shield under the vehicle it will be bolted to brackets below the floor and positioned above the mid exhaust box, although some times with after market mid boxes it attached. If with the D2 you need the heater...
    Mar 30, 2025
  • discool
    discool replied to the thread Will a D2 auto selector fit a D1?.
    Don't forget the D1 transfer box is rod operated unlike the D2, worth a check if that still correct.
    Mar 27, 2025
  • discool
    discool reacted to Loafer61's post in the thread Which drive belt...? with Like Like.
    And the belt goes like this? Clearly there is a bit of slack on the tensioner in my diagram!
    Mar 19, 2025
  • discool
    discool replied to the thread Disco 1 Which wires at the front of the dashboard are for the rear subwoofers in the discovery 1?.
    The model year of your vehicle plus the model of head unit would be helpful, so my info is based on the 95MY. otherwise go to the amplifier and prove what you find back to the birds nest at the dashboard. The answer to your question is None. The...
    Mar 18, 2025
  • discool
    discool replied to the thread Which drive belt...?.
    That is the correct belt routing for a 3.9 without an AC compressor. The disco1 3.9 was never fitted with carburettors, anyway the 3.9 has two belts to pick from, ERR4623 and ERR5579 if fitted with AC… also as always its depending on engine...
    Mar 17, 2025
  • discool
    discool reacted to cws533's post in the thread Disco 1 Intermittent running fault with Like Like.
    Many thanks for your reply, spent a couple of hours outside, learning the system. the micro switch and cam seem fine, not loose at all so traced the wiring to the central locking module. It appears that the CL module is therefore his immobiliser...
    Mar 16, 2025
  • discool
    discool replied to the thread Disco 1 Intermittent running fault.
    Ok you have an understanding on what is involved.👍 You may know that 1994MY was disco a change over year when the 300series was introduced with the updated ‘passive’ immobiliser so a change from the previous active system. 1994 200series had a...
    Mar 16, 2025
  • discool
    discool replied to the thread Disco 1 Intermittent running fault.
    Ok, so deactivating as you are suggesting, the door micro-switch is at the rear of the door lock, check that the re-mobilising function is either with the switch ‘open or closed’ and make that one permanent. With any luck, u may find its as...
    Mar 16, 2025
  • discool
    discool replied to the thread No engine number on Discovery 1 V8.
    STC4378G G = genuine part, the pump can seen behind the radiator when the cowling is unclipped from the top of the rad.
    Mar 12, 2025
  • discool
    discool replied to the thread No engine number on Discovery 1 V8.
    3.5 or 3.9, serpentine belt, or not ? Also a photo of the existing item will be helpful .
    Mar 12, 2025
  • discool
    discool replied to the thread A 3.5 for sale if “it suits you sir” ?.
    Sold to someone thought it was a bargain
    • IMG_8150.jpeg
    Mar 10, 2025
  • discool
    discool replied to the thread Disabling Alarm and Immobilizer.
    The link below may be of interest to you although the are more available, as I expect you have the 4.0 or 4.6 engine fitted to your disco, and if so then I believe that the security system is coded specifically to the vehicle, which will add a...
    Mar 10, 2025
Show older items