1. D

    peterborough green laning

    Give me a shout if and when you do the Melton lanes, would be rude not to tag along seeing as they are my local ones..
  2. D

    onboard compressor

    I got myself one of THESE for Christmas. Seems a decent bit of kit and spec for the money.
  3. D

    Robin Hood, Robin Hood.

    If either of you are heading over to Melton at some point give me a shout as it's my local area. I know a couple of interesting lanes one I wouldn't try solo. Likewise if you want a tag on around Newark let me know :-)
  4. D

    Portable 12v compressor

    Cheers pal. I'll tell the mrs to get me one for christmas!
  5. D

    Portable 12v compressor

    Yeah still looking as I have been spending too much money on building my carport and garage plus haven't had the need as I havent had much time to take the landy out green laneing. The mrs is on my case asking me what she can get me for christmas. I think I will go with the one in the link...
  6. D

    Portable 12v compressor

    Holy thread revival......but has anyone bought one of THESE seems a good spec for the price.
  7. D

    2.2 Oil Filter

    THIS post should enlighten you.
  8. D

    best ways to mount wheel on roof rack??

    I think THESE are what Ttuck3r was refering to in post 2.
  9. D

    Upper and lower plastic steering column shroud

    I have no idea if they are or not. Not to worry now, I have won a pair on eBay, awaiting delivery. Thanks anyhow.
  10. D

    15/40 semi synthetic engine oil

    They only do chevron in 10w 40 or 5w 30 in the 20l drums in Costco. I run the 10w 40 and it's good stuff. Euro car parts do it cheap too: http://www.eurocarparts.com/ecp/p/car-accessories/engine-oils-and-car-fluids/engineoils/10w40-engine-oil/?521776011&0&cc5_245
  11. D

    Upper and lower plastic steering column shroud

    I'm after the upper and lower plastic steering column shroud/surround for my 90. Can anybody help? Near Melton Mowbray, Leicestershire.
  12. D

    Britparts that have lasted

    Britpart temperature sensor for my N/A.....fitted and worked straight out the box. Still going after 3 months....wonder if it will make it to a year.
  13. D

    What have you done to your Landie today.

    Replaced the ignition switch as it wouldn't trigger the glow plugs and the key had to be held in position 3 to keep it running. Hardest bit was the grub screw the rear of the barrel.
  14. D

    2,5 na

    I'd put just shy of 6 in, run it check level then top up to just below the max. These engines don't take kindly to being overfilled.
  15. D

    What to paint chequerplate with?

    As per matchmetisse you will need to acid etch the ally if you want to go down the painting route, else the paint won't get a good key.