In this photo there was 1" blocks on the back as didnt take them off before photo

I love playing and tinkering so anything else I can add? got 2" lift springs & shocks -2 turrets & -2 rear hangers 60mm body lift 6 degree corrected front & rear arms HD steering arms & adjustable panhard Rock sliders Straight through exhaust Boost pin etc Getting alloy radiators etc soon Got...

Top man I'll check it out tomorrow

New project was thinking the BMW engine but too many ecus and bull****. Unsure on what can be a good fit and an improvement This is my disco, was standard when bought then built it, not many "bought parts" mostly built

Just a bigger engine really that has the power & torque. I was thinking a 4.0 v8 out of a p38 then put an lpg kit on but like diesel as bio is cheap.

Anyone know of one that fits in and doesnt cost a fortune. A Cummings will be very tight for a disco so no good. So after a diesel v8 that can fit in a disco or maybe a regular diesel that could cope with a twin turbo set up? It's all an idea for the future

After having no luck at local breakers or even on the 4x4 Facebook groups I got the pipes sorted that I needed to from a breaker in Wales that I sold an engine to years ago so I have everything needed to do it next week. Should be fairly straight forward but we will certainly see. Mine was a...

Don't happen to have a part number? Rang John Craddock & rimmers & the steel pipes are obsolete now apparently nowhere stocks them

I have the flywheel housing, should find a tunnel cover somewhere. My main issue is knowing which pipes to look for and knowing the names

Morning all Right I've looked for a thread containing everything needed to go from auto to manual and can't seem to find much apart from plenty of people going WHY but WHY. So here's why, my truck is slow as ****. Changed the EDC to a manual pump and stuck a boost pin in and not much better...

I'm looking at a td5 Transfer box that should work. Also -35 offset wheels if I can find the right ones and then adjust the steering and possible spacers. I know a mates got 37x14.50r16 on 12j beadlocks so might borrow them from his v8 rock crawler. Arches etc are stock at the min as it's still...

Got a 2" lift 2.5" body lift 6 degree front and rear arms Wide angle props- possibly going to double carbon props at some point in the future. Will be looking at fitting 40x13.50r17 tyres in the future (this truck is a project that I'm doing over time) I know there's alot of cutting and work...

Well in that case it doesn't work as i must of pressed the fob a dozen times on each button, Central locking does work spot on via the key but would obviously like a functioning fob.

Right, I'll stick it on a scanner next week and then have a good look round it. The wipers do stop then start again so essentially its stuck in the slow position but think i may have a spare set of stalks knocking around. As for the unoffical wiring, There are plenty of wires around the engine...

Hey all. Right bear with me on this. Bought a 300tdi ES Auto not running etc Stripped it down, did the cam belt new oil seals etc. needed a new woodworth key alongside puddle welding to close up the massive chunk that was missing around the key. Ripped out the AC System (Its Britain, will...