Will see when I take all apart. But I can feel vibration so I'm sure that my drive plate is broken again. So for sure will need to take off gearbox and everything what goes with that. Only to be on safe side, will take my old gearbox to dealer so they can take look. Maybe, if it's valve bank...

Exactly. And I'm thinking logically, but in my logic (what it only mine :) ) is telling me that transfer box doesn't have nothing with shifting gears. I had problem on my previous RR P38 with transfer box and chain inside, I changed transfer box and that was it... So, again, my logic is telling...

So you are saying to me that it is not TC, and that it is gearbox. Because I dont see that transfer box can have anything with that, if chain is loose, it will jump and that is it, sound will me there and that is it. No kick when shifting gears down...

Will check all the wires. I would be happy if it is something like that. But on the other hand, I have some weird vibration now and it seems that my drive plate broke...again

Yea, maybe I have been seriously unlucky... But I didn't change TC, so I'm thinking to change TC and will see what good will that bring...if any :/

And what was the problem?

I have changed only gearbox itself, transfer box is old. I have noise, or kick when it is shifting lower gears. If I'm driving 50kmh and want to stop on light when I start with breaking and, ofc, gearbox starts to lower the gears it changes from 3rd to 2nd and to 1st with kick...like if there...

Ofc, that was my first thing to check before I did any job. And finally when I checked everything and changed oil few times I decided to change gearbox...and...no luck Noise is still there.

Yea. I did it as per workshop manual. And I took out approx 5 lit, and put in same amount. When I'm checking it. It's alright. But why is so rough when is shifting gears down? I would say that, if it's not automatic gearbox, someone is just letting go clutch so it hits very hard. Or I'm...

Thanks! Will try. But it still doesn't make any sense. I changed gearbox, and gearbox that I have mounted now I was driving for one year in different car few months before.

I have changed oil for two times now and it's not getting any better. When you say Lucas...you mean...

how to post picture here? Will need to look into it. :) Don't have to much pictures but will find something and open topic how I work on some of them...

Sticky valve block? How to fix this? I'm afraid that it will break my drive plate.

I have quite a bit of lands...that was my fathers love... Range Rovers Now driving P38 1998 4.6 auto And have RRC 3.9

Gents, Will need your help on this one. Have problem with my P38. Automatic gearbox 4hp24, 4.6 1998 When I start with putting it in D, there is small hit between 1st and 2nd gear. everything else is albite and it drives perfectly. But, when I start to slow down and it shifts down...it...