Morning orl. Us boys adder call vrum us gonzultant on Vridy. Er zez us be cancer-vree so us be well chuffered. Av tu geddus veet zortid now a then us be reddy fer ort.
Vinylly goddus chikkins in proper owzin a fit fer winter. Zittin rume an...
Back from the show. The club was well represented with at least 13 cars on display. The organisers goofed and some were placed away from the main group. But overall it was a great show.
This is one of the club member's cars. A classic with a...
It is so flipping hot here that we can neither of us be bothered to go down to the pool.
This sounds mad, but we made the decision from the off to not have one you can nearly, or even probably, dive into from the living room french doors.
I'd...
Yes, I am heeding what both you and @landowner and others are saying. It is a 50 year old Mini with A-Series technology with no ECU etc. etc. I only need to get it running sweet not "perfect". That'll do me fine. I am pleased to have got it...
On what is likely to be a final remark to do with this as I think you have got it aabout right now, this trubble you have had reminds me very vividly of the same trouble, sort of, that I had with W's Porsche copy kit car.
The engine was a tuned...
It gets complicated when you try too hard to make things perfect, ... it's a Mini :)
Did you find out if you have a 10 deg dizzy ? If so set timing so you have over 30 deg at 4000rpm but no more than 35.
If it pinks low down then you have the...
Did I?
I thought I just said that I thought the rolling road guy was a cowboy.
If he tunes engines as you say, then apart from the exhaust analyser, then he is doing it the same way as I would.
I don't have a Snap-on strobe, my strobe is a Gunson...
So, up at dawn this morning to make a start on the apple harvest.
Dreadful this year compared to last.
We will get a fairish bit of juice but nowhere near the bumper crop we had last year. We still have stuff to spare in both countries. Good...
Sorry, the pic of that plug was from the guy AC DODD who you professed a dislike for. His day job is tuning SU carb'd engines.
I am going to be doing a bit more miles tomorrow going to that show so I will pull the plugs after that round trip...
100 thou. So 1/10 of an inch. Without measuring it, just looking at by eye on your pic, that looks to me a bit more than that.
Just saying. Have you actually measured it?
And I am not sure who you are referring to, is it you, being ironic about...