Ferrabout the last 6 weeks they have changed to realising I'm full ov nuts and drop them where ever eye goes.

Peeps tend not to wash, polish the roof as much as the bonnet. Eye does both on ma ippo.

Doubtless you will be round there with a big trailer soon to put her out of her misery, poor thing! ;)

ROFL!!!!! 🤣 🤣 🤣 🤣

Morning All. :D A reasonable day here it seems, although a tad "brisk". :) Soon be Christmas eh? (158 days). Have a great day! :D

Your right I spose I don't like compression joints on show so rather than solder a bend in I was thinking I can get a tighter bend in the micropipe so it looks neater. I also have a part roll of micro pipe in the shed and the rad needs a new...

There's a sqworkin squirrel on me garage going bonkers at worr eye fort was anuvva squirrel who wants to share brekfust nuts. He's bin going fer 5 mins despite me looking out so eye gorrup and went out the front to look down the side ov me...

However, I do think Dacia have got it right with that Spring fing of theirs. Small, cheap, reasonable miles. Most other leccy cars are monstrous great things with too many doohickies to drain the battery. Like they say K I S S.

TBH I wouldnt bother, fresh coat of paint on the pipes. Whos gonna see/know/care? (the answer is not you) If you really want them to run on top of the skirting they will be more visible even if smaller pipe. Yes there will be extra resitance to...

In other news. Fresh new pulley fitted to the spare alternator last afternoon. Loctite 620 on the spindle and threadlock on the.. errm.. thread. Running very sweetly now. Made me realise just how crackered the old one was. Now, where's me Sou'...

I gots 6%. Course, 6% of buggrall dunt come to much..

All sounds a bit overblown and iffy to me. Fink I'd find someone else..

Fresh coat of white paint on the pipes, will make it look neater with a lot less work.

Problem (maybe) Looking to replace these pipes from the pipe cover to the radiator. 15mm to 10mm elbows then 10mm micro pipes along top of skirting boards to rad. Reason is so I can lift pipes higher and get tighter bends to rad valves, should...

The roof? Just a thought if thay used sea foam and it dried on in hot sunshine

Saw that on tinter web, but "er indoors wouldn't let me go :rolleyes:

Have you got day tickets to Swingerfest?

Tidied part of me garage this morning to a (very) basic standard and binned some junk. Emptied my box of assorted drill bits yesterday and binned most of them (why I kept knackered bits I don't know). Got under me tratter bonnet this morning and...

Or cut shortern in the pipe trunking make them both run above the skirting in a neat manner and lift the Rad brackets a few inchs higher. Or just remake the 1 that used to run along the wall from inside the trunking. or just the last bit from the...

Morning all, I might get some welding done later. Off to polish a bit of my boat I may be back sooner if it starts to rain (very dull n overcast) njoy yer day zooners.

Problem is more than visual Old skirting was only 2" high and one pipe ran above and one along the wood Pipes need to be bended outwards to clear the skirting as they don't (and never have) sit nicely on the wall as they come down So either bend...

Morning All. :D Cat's unwell, has a little diarrhoea problem. :( Usually cats manage to sort themselves out and their gut is very robust, but if she is still unwell by Monday its the Vet's. No thunderstorms and just light rain here (yellow...

Might be, I don't know. I may give it a good MER polish on the bonnet. :cool:

Is it just that the clear/lacquer coat is going orf???

Well the other panels are all fine so I think it is just the bonnet. It does look nice though (overall).

Was it like it before the clean ? THAY may have used the wrong stuff or to aggressive cleaner

Don't spend it all at once.