• DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    The lekky dude has called the lad next door & said he has local jobs an would like to keep local work... if he booked today he will take a grand off the price. So he knows he's priced it high.
    Jun 26, 2025
  • DanClarke
    DanClarke reacted to Stone56's post in the thread I would just like to say with Like Like.
    And his hair was yellow tis now white, bet he forget to pack the dye
    Jun 26, 2025
  • DanClarke
    DanClarke reacted to Stone56's post in the thread I would just like to say with Like Like.
    I haven't got a clue never been in one 😊
    Jun 26, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Morning All. :D Still here. :) Have a great day! :D
    Jun 26, 2025
  • DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    Tis ok you were drunk & that's acceptable ;)
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    Plastering is getting done later & thats a separate job. :)
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    36 sockets & switches, new fusebox & everything else that goes with it. House empty & all floor coverings have been removed. Yes all certified but still sounds an mighty high price me is thinking he doesnt want the job so has priced it high...
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to kevstar's post in the thread I would just like to say with Like Like.
    The saying get yer hedgehog out doesnt have the same ring to it. 🤣
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Turktowner's post in the thread I would just like to say with Like Like.
    Mine will do seventy quite quick for two bricks mating, bits threaten to fall oft thereafter..
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Turktowner's post in the thread I would just like to say with Like Like.
    Must be redders in the Hague, did you see the Trumpkins tan?!
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Hicap phill's post in the thread I would just like to say with Like Like.
    Was that on a recovery lorry? ;)
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to saxavordian's post in the thread I would just like to say with Like Like.
    Inherited house not council property. Due to my mother declining physical ability. Manchester social services assessment for alterations to the house via grant scheme. With a percentage cost to the owner on financial ability. I think it was the...
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    Thought I'd share this with you all. Scan of a cartoon from my fav cartoonist (GILES) from my collection, and a photo I took in 2022 when there for my dottir's wedding. Her married name is Giles. With a bit of foresight I should have put my...
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    That's the way to do it.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Wimblowdriver's post in the thread I would just like to say with Like Like.
    Provided you are competent (knowledge + experience) you can do your own work. There are some jobs you are not supposed to do yourself, and require a proper electrician, such as installing a complete new circuit from the consumer unit, working on...
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Its the death of the householder that electrocuted himself by feeding one room from two sources and only switchin one source off at the board.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to landowner's post in the thread I would just like to say with Like Like.
    Arrived, 230 miles at 70/75 and showing 43 mpg Happy with that 🙂
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    I replaced that seat mesh on my trike. :) Seems OK. Time will tell. Is already nicer to sit on. Will need tightening up after a while.
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Wow! That depends on the house I guess, but that sounds way over the top. Used to be you could DIY and then call the electricity board to come and do a safety check. Nowadays everything has to be NICIEC certified (or whatever has now...
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Stanleysteamer's post in the thread I would just like to say with Like Like.
    Oh dear, oh dear, oh dear. 😭😭😭 Hope it does her good. Give her my best wishes for a rapid recovery. Crossed fingers for you both.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to GRATCH's post in the thread I would just like to say with Like Like.
    I expect the rat is scared of having your sausage inside him.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Freddie17's post in the thread I would just like to say with Like Like.
    Yeah - you’ve been turning them off every time !
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Freddie17's post in the thread I would just like to say with Like Like.
    They should just activate when you engage reverse. Button just under the screen on the dash to turn off/on
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to landowner's post in the thread I would just like to say with Like Like.
    Mornin Drizzle early on but brightening up Not be needing factor 50 in Scotland by the looks of it 🤔 Got me tools in the boot and a brolly, goin round to GF's to pick up her bags then see if there's any room left for mine 🤣 Should be heading...
    Jun 25, 2025
  • DanClarke
    DanClarke replied to the thread I would just like to say.
    Morning All. :D Still here (it seems). :) I was making some axles for a friend out of 15mm Silver Steel round bar yesterday. The end needed drilling and tapping at M8. Gosh that silver steel is tough. Very hard to cut the thread. Got to work...
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Traps still set.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to Hippo's post in the thread I would just like to say with Like Like.
    Trap not tripped yet.
    Jun 25, 2025
  • DanClarke
    DanClarke reacted to saxavordian's post in the thread I would just like to say with Like Like.
    Jun 25, 2025
Show older items