on my 1970 swb 88 which has latter rear axle i have oil coming out several places from my rear hub , 1 how does one check the level my rear hub plug is rusted in tight and 2 the oil is coming out by the rear hub seal and over my rear tyre

having replace my pads in my seat i have two fronts and backs square pads for a series land rover they are in like new condition buyer collects i am in west cornwall tr 19 6hu

I bought this KPH speedometer in error from paddocks its a new part having used it for 65 miles they would not replace with mph one its for a series 2a/3 hence this on my shelf bought this year hence 60.00 plus postage i am in west cornwall tr19 6hu

forgot to say its on a short wheel base 88 with tdi diseal fitted

On my series 3 I have twelve leaf spring my landy is used for road use these days what is best and how leaves should I have the ride is hard as it is.

Bar cutting my head off a raised seat arrangement makes it worse my peddles are 8 inches off the floor and the accelerator has been modified and is a non standard fitting if I cut the peddles down is there any problems with doing so?

can any one tell me how high the peddles should be as a tall person i am finding the peddles hardwork as they stick up a long way can they be shortened and is there any problems if i do?.

i have set them at 30 psi and seems fine

Having just fitted a 235x 16 tyre the garage has set them to 30 psi is that a bit hard they are on tubeless tyres.

try A plan insurance 01635 874646 who was very good with my two land rovers real people no middle men if you have a mishap! Not like Adrian Flux who left me in a right mess after mine was written off with its insurance claim year later and still not sorted out!

multi leaf I fitted some new Monroe shocks and the ride is much better thanks

that's fine but doesn't answer me question how do I check which is the right rim for that size of tyre

I expect that this is a silly question i have modular wheels on my series 3 and want to buy a spare to match the others the tyres are 7.50 x 16 am i right in that a 7x16 rim is the right size for this tyre?.

having looked in the books I am a little confused over how to remove the glass from the front wind screen bar hitting it with a hammer any ideas Please

it bounces and keeps bouncing though roads here abouts are lumpy due to old mine workings