Thank you for the reply im going to fit it all back and see what happens and will get back to you hopefully it works this time

yes gearbox is fine it selects all gears when the landy is of but when she idle clutch in not selecting gear new clutch was fitted

Is normal for the pressure plate fins to be this flat after its been torqued 25Nm

Hy guys My gearbox packed up few months ago on my disco 300tdi. Bought recon one guy i got it form said it came of a v8 landy but is a r380 53a gearbox he said it wil fit my 300tdi. Got gearbox home took my old gearbox bell housing off my gearbox and fitted to the new gearbox Got new clutch...

Hy guys My gearbox packed up few months ago on my disco 300tdi. Bought recon one guy i got it form said it came of a v8 landy but is a r380 53a gearbox he said it wil fit my 300tdi. Got gearbox home took my old gearbox bell housing off my gearbox and fitted to the new gearbox Got new clutch...

clutch kit STC8358AP Clutch fork FTC2957G push rod FTC3912 Clutch release bearing FTC5200G

no its a Veleo clutch part number STC8358AP

No i made sure that the clutch plate was in the right way

I did bleed the clutch a couple of times but still no luck

this is what I used to remove and put it back together

I'm working with the manual and I followed it step by step 1 to 84 to make sure I did every step correctly i took the gearbox out again to make sure but still does the same. but the clutch feels soft

How do you check the clutch drag and how do you adjust it?

Thank you for the reply how would one go to check this