Really needs a nanocom or something plugging in

Did you say its starts with easy start?

if the pump is running and it still wont start then could be injector faults due to an ECU issue or wiring/harness issue, or perhaps an immobilizer issue, has it been plugged in to any diagnostics to see if there is any codes and you can connect...

Oh , is the inertia switch ok? (fuel cut off)

does it crank over quickly? also can you hear the fuel pump in the tank running? should make a humming noise.

Ok, Also , what was the first symptom? has this only been an issue since the M & S lights came on? the chain of events would be helpful.

yes, the above posts will only sort the park light issue, the starting issue is most likely a separate issue. does the temp rise with ignition on but before you crank?

Just found the pictures in the manual.

Hi, Does it still have the issue? i would re set up the gear linkage, find the linkage on the side of the auto box on exhaust side, undo the nut that clamps the link rod and push the lever towards the front of the vehicle until it clicks in to...

Hello, I have a discovery td5 and a nanocom however the nanocom seems to have an error and keeps coming up with SD card error when trying to read or write ECU map, I have tried a few different cards and used the nanocom formating tool from...