Okay still doesn’t feel 100% Checked the fuse under bonnet and relay is fine When I test the system with this computer it does bounce around so a step closer But don’t seem to be getting anything at Direction valve 1 Direction valve 2 Or pressure control valve Even when driving it’s 0...

Also should the relay be on or off when running

So changed the transducer Not much has changed but don’t get a warning light anymore Got a different computer and did a system check it failed Results in pics Any ideas

Thanks for the help

I will change pressure transducer Then the ecu

Filter is new

i think hoses are correct tried the ramps tried bleeding with nonocom but nothing happens been for a drive but its not 100% this is my hose set up

Will give this a try thanks for the help

Okay thanks Won’t have computer till right so I have the results with car parked with no lights on dash looks okay to me I’ve also attached results with the light on and parked I’m wondering if the pressure transducer is playing up giving the ECU a wrong reading then throwing the light on...

Okay thanks will look into it

No problem thanks for the help haven’t heard of this mod but will see what others say

The system worked well before the hose change I carried out this work due to split in steel line

I’ve been told the nanocom codes aren’t reliable Amber light comes and goes Almost feels like the rear isnt acting the same as front And when the light comes on it’s doesn’t feel like it’s work at all

Haven’t checked but thought as I was getting 100 bar things are working but not well

pictures attached