You can cut them ?

In your second pic, it bolts onto the bracket under the door lock and when closed, engages into the fixture on the body. I believe they were fitted to support the door when a spare wheel was on the back. by the way its a series 3 1982 swb. A...

You feel good when you find the problem.

It's the light coloured material. at the centre. It appears I was a bit abrupt with my request for information. my apologies.

I don't have one, but I have a couple of large chunks of brass which I can utilise. cheers.

Find yourself a safe clear space going downhill, then switch off the engine and freewheel down. See if it stops. Take care if you have power steering of course.

Its coming on mate, made the wheel arch repair out of three pieces so far, small piece of channel to make at bottom, used cardboard templates, then doing repair piece for the centre cill, would have to be the back part were it tapers, inner cill...

I've just found this Ray Milland and others. But there are two landys at the start, one a fire engine. If anyone is interested. Only seen 10 minutes so far.

This was an abandoned project of my eldest son. Everything else has beeen repaired or replaced including new chassis. I am rebuilding with another son. Almost complete. On another note, I have seen comments regarding the rear check strap. Has...

Thought I would show you a little bit of rust for your amusement I've run out of gas so I cant weld it up, got the bits though. Hope you are all well anorl.

Could just post whats left of the disco in an envelope.