1. B

    Removing the viscous fan

    Never mind, all sorted now! Called out the AA and asked for a man with some diagnostics - they said that's fine, he'll be there within the hour. They actually sent a bloke on a motorbike who had no diagnostic equipment but he had a go anyway. Turned out to be fuel starvation - squirt of...
  2. B

    Removing the viscous fan

    Just went outside and filled it up with coolant again but now it won't start :eek: The battery appears to be fine as the engine turns over a decent speed and there are no error messages on the computer - aside from the normal ones saying that the windows need to be reset after disconnecting the...
  3. B

    Removing the viscous fan

    Tried Davie F's mole grips method but once it got wedged against something and I put a lot of force into it, the grips slipped on the shaft :( Managed to get it done though. Managed to get the belt around the fan and on to the correct pulleys then used the fan spanner to rotate all the...
  4. B

    Removing the viscous fan

    paddocks1967, I've tried wedging a long screwdriver between those bolt heads but there is very little access and holding it in place is very difficult. I did get a price from Euro - as a member of the Ford Focus Owners Club I get a discount with them. The price with the discount came to...
  5. B

    Removing the viscous fan

    I did try a factor first but the Halfords computer gave a cheaper price although it was the price of a wrong belt. Luckily they reduced the price of the correct belt to the price of the wrong one so it didn't work out too badly. Also, having a Halfords Trade Card usually gives more...
  6. B

    Removing the viscous fan

    I live in Coventry and if I can't get it done tomorrow I may have to beg someone for some help lol. Halfords have called and have the belt in now (it's only taken them a week!) so hopefully I can get it all sorted tomorrow. The computer error has actually worked in my favour! I got the...
  7. B

    Removing the viscous fan

    Hi wammers, The cowl has been unclipped and I have the rad clear of that but it's the fan itself that is in the way now: The bracket on the bottom of the rad is hitting the centre of the fan. Currently waiting for a new belt to be delivered to Halfords - their computer system listed...
  8. B

    Removing the viscous fan

    Hi, Fan belt has snapped on our P38 diesel. It didn't just snap - it separated along the ridges so there were effectively several individual belts. These then exploded into a million pieces and wrapped themselves around all the other pulleys, destroying the idler next to the alternator in...