I still have that. Took it oft before they collected the bus

😇 cheers Range Roller, it's very nice of all the lads to say hello and has made my day . Everybody seems to be still involved in helping each other out, which was the reason it was all set up originally and after all this time ids as strong as...

EXACTLY WHY SEEING YOU HERE HAS BRIGHTENED UP ALL OUR DAYS 👍

I bet the driver was getting some cake

Was it not the battery clamp from that rascally Tomcatalan.

That poor train keeps going through the buffers :vb-biggrin:

HI MOZZ GOOD TO SEE YOUR STILL AROUND :) UNFORTUNATELY IF YOU MISSED IT WE LOST DOPEY JUST BEFORE CHRISTMAS AFTER A SHORT ILLNESS:(

You mean you didnt have tea and cake whilst doing the work, you are slacking its a given when working on Rangerovers :vb-biggrin:

dont forget the tea and cake :vb-biggrin: :vb-tup:

Owww custard creams now were talking :vb-biggrin:

Vanilla slices🤤

I heard Walnut cake mentioned were is this said cake as iam hungry now :vb-biggrin: always room for cake

Quick update

Just look that one up very good price for what it does and more usefull than Nanocom if you have other motors :)

Sounds about right , what reader are you using as the doozel is not obd compliant very few will read a p38 doozel

Ah ok i was probably over reading it as well trying to think a bit out side the box.

I have never heard a pssschhh on mine there is no dump valve to make that noise unless you have a split in the pipe work from turbo to inlet manifold you should not get a noise.

He hasn't noticed that he has actually got a diesel.

Yes i have the proper tool, makes it a lot easier, its quite a weighty lump.

Glad its sorted, they are very nice when they are working right. :)

You know you want it :vb-biggrin:

found a blue one near an abandoned house under some brambles. Wondering who owns the land as it looks a sorta nice one? Try get a pic if I’m in that area next week

There are three pumps on the l322 intank transfer one, mid one under the car and the high pressure one on the engine.

There is a transfer pump in the tank to pump from one side to the other if that has gone it can look like you have fuel but the side the pickup is in has not, open the fuel cap and have a listen for the pump running.

Dont bother trying to press the old bushes out run a drill bit through the bush a couple of times just catching the inside of plastic outer and you should be able to collapse the outer and hook them out with a screw driver.

Yeah you need 4 individual bushes. Temporary solution that will probably save you a bunch of time: -Use the two bushes you have now to replace the ones you've marked in blue. One on each radius arm. -Refit the radius arms with the old bushes in...

We are at the final steps, leaving the courtyard of the house the Range arrives at a true professional who will bring it back to its glorious splendor ❤️

That modulation is way out it should be 50%

When I did mine I put the chassis on stands and had the wheels on the ground so axle was supported and did one arm at a time that way nothing moved