Thank you, much apprechated 👍 .

Hi, thanks for all your help 👍 Eventualy found a link on here to a wiring diagram that i can blow up and see the colours, now just need to find out the colour codes used by L/R :confused:

Thats what i thought about them running parrallel, problum is they dont, not sure where to look now unless i just splice some new wire in for the extra speakers

Thank you, however the colours in the diagram do not match what i have ???

Hi, thanks for the diadrams, unfortunaly even if i download and zoom i am unable to see the wire colours or read what is what

Hi Both wires have black as the main colour, black with red trace & black with pink trace ???. I have no amp. to test the spare wires i connected a new speaker Thanks Bill

Hi Hoping someone can help me wire some replacement front door speakers in my 2001 Td5 To start with the new speakers have got a + and - symbol but the old (origional) speakers have nothing and both the spade connectors are the same size, the wires to the origional speakers are Black with a Red...

Hi and thank you both your answers. So to answer your questions, I have always been able to unlock with the key if it was locked with the key since I've had the car (about 3 years) and the alarm has never gone of when i opened the door, thought this was normal. I lock it on the key because...

After losing the unlock microswitch on my old key fob i got a new one and had it programmed to my D2. Now if i lock using the new key and unlock on the key the red light on the dash goes out but as soon as i open the door even a fraction the alarm goes of and i have to put the key in the...

Hi there Sorry for causing confusion but it's the unlock button that was the problem, (I blame old age) . The unlock microswitch is not there but the two small blobs of solder it was connected to are still on the circuit board and it was these i bridged to make a contact and get the doors to...

Just a quick update Got new key on way and have been using bit of wire to bridge contacts to unlock doors (happy hotel guests now). Found someone local with nanocom so as soon as home hope to get it all sorted. Thank you all for your help and advice. Billybones.

Hi The "lock" microswitch is not there at all, when it stopped working i tried to peal back the soft rubber button so i could use something to press the microswitch, as soon as i pealed it back the microswitch fell out of the case.

Hi I removed the sensors to drill a hole in the roof to run some wires through, the alarm was working fine before this.

Apologies for the confusion, my fault, its the Lock button that has fell out, the complete microswitch broke off and came out of a hole in the soft bit of the fob, Lock button is still there and works. Have no nanocom or similar and nowhere near anyone who has one. Trying to find out why it used...

Hi Hope someone can help with this. Vehicle is a 2001 Disco Td5. Away from home at the moment and the "unlock" button on the keyfob has fell out, can still lock/unlock using the key but when i unlock with the key the red light on dash goes out but as soon as i open the door the alarm goes off...